Lower Temperature Sintering of BaTiO3 with Glass Phases.
نویسندگان
چکیده
منابع مشابه
Model for sintering polydispersed glass particles
We propose a model to describe the sintering kinetics of polydispersed glass particles, having no adjustable parameter. The model is based on three sintering stages: a pure `Frenkel' (F) ®rst step, a mixed `Frenkel/Mackenzie± Shuttleworth' stage, and a third, pure `Mackenzie±Shuttleworth' (MS) step. The model considers sample shrinkage as the sum of the partial shrinkage of several clusters, ea...
متن کاملModel for Sintering Devitrifying Glass Particles with Embedded Rigid Fibers
We extend the Clusters model to account for the presence of rigid inclusions and use it to analyze the experimental sintering kinetics of composites of 60SiO2 . 24B2O3 . 16Na2O glass particles and zirconia fibers. We followed the densification kinetics of such composites as a function of the particle size, volume fraction of fibers, fiber to pore size ratio, temperature, and time of thermal tre...
متن کاملWaste derived glass ceramic composites prepared by low temperature sintering/sinter-crystallisation
Waste derived glass ceramic composites prepared by low temperature sintering/sinter-crystallisation I. Ponsot, R. Detsch, A. R. Boccaccini & E. Bernardo To cite this article: I. Ponsot, R. Detsch, A. R. Boccaccini & E. Bernardo (2015) Waste derived glass ceramic composites prepared by low temperature sintering/sinter-crystallisation, Advances in Applied Ceramics, 114:sup1, S17-S25, DOI: 10.1179...
متن کاملLow-Temperature Sintering of Alumina with Liquid-Forming Additives
Simultaneous application of colloidal processing and liquidforming additives to alumina resulted in a sintered density of >99% in 1 h at a temperature as low as 1070°C for a commercial high-purity alumina powder at a total dopant level of 2 mol%. The additives were 0.9% CuO + 0.9% TiOz + 0.1% B 2 0 3 + 0.1% MgO. At higher temperatures or after prolonged sintering, the doped alumina ceramic deve...
متن کاملSintering in Nitrogen Atmosphere of Iron-Rich Glass-Ceramics
The sintering and the crystallization of two iron-rich glass compositions (45–75m powder fractions) were studied in air and nitrogen atmospheres. The phase formation was evaluated by differential thermal analysis, while the densification, by dilatometry; the crystalline phases were identified by X-ray diffraction and the structure observed by scanning electron microscopy. It was highlighted tha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1997
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.44.73