Lubricant for Paper Coating
نویسندگان
چکیده
منابع مشابه
Wear resistant solid lubricant coating made from PTFE and epoxy
A composite coating of polytetrafluoroethylene and epoxy shows 100 · improvements in wear resistance as compared to either of its constituents alone and reduced friction coefficient under testing on a pin-on-disk tribometer. This coating is made by impregnating an expanded PTFE film with epoxy, which provides three unique functions: (1) the epoxy compartmentalizes the PTFE nodes, which is belie...
متن کاملQuantification of a Lubricant Transfer Process that Enhances the Sliding Life of a MoS2 Coating
A lubricant transfer process that enhanced the wear life of a MoS2 coating has been identified and quantified. A steel ball sliding against a coated steel flat in reciprocating motion produced reservoirs at the turnaround part of the track ends, then emptied them, to provide replenishment similar to what is expected of liquid lubricants. The dynamics of the process were inferred from measuremen...
متن کاملComplex frictional analysis of self-lubricant W-S-C/Cr coating.
Transition metal dichalcogenides belong to one of the most developed classes of materials for solid lubrication. However, one of the main drawbacks of most of the self-lubricating coatings is their low load-bearing capacity, particularly in terrestrial atmospheres. In our previous work, alloying thin films based on tungsten disulfide with non-metallic interstitial elements, such as carbon or ni...
متن کاملEffects of coating formulation on coating thermal properties and coated paper print quality in xerography
The effects of coating formulation on thermal characteristics of coating layers (namely thermal diffusivity, specific heat capacity and heat conductivity) were systematically studied and their impact on xerography print quality was evaluated. Model coatings were prepared using ground calcium carbonate or kaolin pigment mixed with styrene butadiene latex binder in various proportions (from 6 to ...
متن کاملThe Influence of Nano-Fibrillated Cellulose as a Coating Component in Paper Coating
This work investigates nano-fibrillated cellulose (NFC) as a component in mineral pigment paper coating. In this work, bleached Eucalyptus pulp was pretreated by TEMPO (2,2,6,6-tetramethyl-1-piperdinyloxy)-mediated oxidation. The oxidized pulp was then isolated to obtain NFC by sonication. Aqueous coating colors consisting of calcium carbonate, clay, carboxylated butadiene-styrene latex, additi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JAPAN TAPPI JOURNAL
سال: 1999
ISSN: 0022-815X,1881-1000
DOI: 10.2524/jtappij.53.1179