Lubrication Characteristics of Laser Textured Parallel Thrust Bearing : Part 4 - Effect of Dimple Shape
نویسندگان
چکیده
منابع مشابه
Laser Textured Surfaces for Mixed Lubrication: Influence of Aspect Ratio, Textured Area and Dimple Arrangement
Unidirectional sliding experiments with polished and laser textured steel surfaces were carried out to investigate the effects of different textured area densities, aspect ratios and dimple arrangements. The system was lubricated with Polyalphaolefin (PAO) at 100 °C and the contact pressure was 3 MPa. For measuring Stribeck curves, the sliding speed was controlled between 40 and 2000 mm/s. The ...
متن کاملNumerical investigation of the tribological performance of micro-dimple textured surfaces under hydrodynamic lubrication
Surface texturing is an important approach for controlling the tribological behavior of friction pairs used in mechanical and biological engineering. In this study, by utilizing the method of three-dimensional computational fluid dynamics (CFD) simulation, the lubrication model of a friction pair with micro-dimple array was established based on the Navier-Stokes equations. The typical pressure ...
متن کاملFrictional Characteristics of Thrust Bearing in Scroll Compressor
This paper presents frictional characteristics of thrust bearing in scroll compressor. The coefficient of friction in thrust bearing was measured by both elemental friction test and loss classification based on the performance test of actual scroll compressor, and investigated frictional characteristics focusing on the behavior of sliding portion which affects the generation of oil film by expe...
متن کاملcontrol of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولMixed Lubrication of Coupled Journal-Thrust-Bearing Systems Including Mass Conserving Cavitation
A mixed lubrication model is developed to investigate the lubrication of coupled journalthrust-bearing systems. The governing equations are mapped into a computational domain with a conformal mapping technique developed in a previous study by Wang et al. (2002). In order to study the influence of the boundary conditions on the performance of the bearing system, either the Reynolds boundary cond...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Society of Tribologists and Lubrication Engineers
سال: 2011
ISSN: 1229-4845
DOI: 10.9725/kstle.2011.27.6.338