Mach 6 Testing of a Scramjet Engine Model
نویسندگان
چکیده
منابع مشابه
investigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
Computational Parametric Study of Sidewall-Compression Scramjet Inlet Performance at Mach 10
A computational parametric study of three-dimensional, sidewallcompression scramjet inlets was performed to identify the e ects of geometric parameters on inlet performance. The parameters were the leadingedge sweep angle, varied between 30 and 60 , and the leading-edge position of the cowl, located at the throat and at two forward positions. A laminar boundary layer with cold-wall (T wall = 30...
متن کاملEngine Testing Engine Test System
Engine testing involves measurement of rotating speed and torque of the engine by applying load controlled by a dynamometer connected to its output shaft. HORIBA has developed various types of dynamometer for the purpose of engine testing. They are mainly classifi ed into two types; one is absorbing only dynamometer such as hydraulic dynamometers and eddy-current dynamometers, the other is abso...
متن کاملScramjet Systems Integration for a Dual Mode Scramjet Flight Test
The Hy-V project will conduct the first-ever mode-transition flight-test for a dual-mode hypersonic scramjet, which will occur at approximately 90,000 feet onboard a sounding rocket. At altitude, atmospheric conditions and inlet flow speed will match the flow conditions simulated in the UVA Aerospace Research Laboratory (ARL) hypersonic wind tunnel. Geometric similarity between the wind tunnel ...
متن کاملComputational evaluation of strut based scramjet engine combustion with different conventional fuel/oxidizer
The high performance and instability in combustion chamber are the most challenging requirements for faster developments and technical advances in most of the engines. The design and development challenges of such engines are highly influenced by its combustion behavior taking place inside the combustion chamber. Studies on the injection, vaporization and combustion phenomena inside combustion ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Propulsion and Power
سال: 1997
ISSN: 0748-4658,1533-3876
DOI: 10.2514/2.5201