Machining and heat treatment as post-processing strategies for Ni-superalloys structures fabricated using direct energy deposition

Open-Cellular Co-Base and Ni-Base Superalloys Fabricated by Electron Beam Melting

Reticulated mesh samples of Co-29Cr-6Mo alloy and Ni-21Cr-9Mo-4Nb alloy (625) and stochastic foam samples of Co-29Cr-6Mo alloy fabricated by electron beam melting were characterized by optical metallography, and the dynamic stiffness (Young's modulus) was measured by resonant frequency analysis. The relative stiffness (E/Es) versus relative density (ρ/ρs) plotted on a log-log basis resulted in ...

Three-dimensional Composite Lattice Structures Fabricated by Electrical Discharge Machining

We present a novel method for fabricating carbon fiber composite sandwich panels with lattice core construction by means of electrical discharge machining (EDM). First, flattop corrugated carbon fiber composite cores were fabricated by a hot press molding method. Then, two composite face sheets were bonded to each corrugated core to create precursor sandwich panels. These panels were transforme...

D. Heat processing by direct and radiated energy

nano-rods zno as an efficient catalyst for the synthesis of chromene phosphonates, direct amidation and formylation of amines

چکیده ندارد.

High Temperature Nanoindentation of Ni-base Superalloys

Novel techniques for characterizing and assessing the properties of Ni-base superalloys are becoming increasingly important to the accelerated development of new structural alloys and the advancement of physics-based mechanical property models. Instrumented indentation techniques have long served as a useful approach for probing the mechanical response of a wide range of engineering materials. ...