Machining Error Compensation System in End Milling (1st Report)
نویسندگان
چکیده
منابع مشابه
Compliance error compensation in robotic-based milling
The paper deals with the problem of compliance errors compensation in robotic-based milling. Contrary to previous works that assume that the forces/torques generated by the manufacturing process are constant, the interaction between the milling tool and the workpiece is modeled in details. It takes into account the tool geometry, the number of teeth, the feed rate, the spindle rotation speed an...
متن کاملThe real-time error compensation technique for CNC machining systems
One of the important trends in precision machining is the development of real-time error compensation technique. This paper presents the research work under the authors and their team in this area. The technique has been applied to more than 10 different kinds of machines including: turning centers and machining centers; small, medium and large machines; new products and retrofitted machines. T...
متن کاملOptimization of Machining Parameters to Minimize Tool Deflection in the End Milling Operation Using Genetic Algorithm
Optimization of cutting parameters is valuable in terms of providing high precision and efficient machining. One of the effects of cutting force in the end milling operation with low diameter tool (during metal cutting) is tool deflection. Assuming that machining errors mostly arise from tool deflection, attempt was made to optimize machining parameters using Genetic Algorithm (GA) so as to min...
متن کاملInvestigations on Mechanics-Based Process Planning of Micro-End Milling in Machining Mold Cavities
This article may be used for research, teaching and private study purposes. Any substantial or systematic reproduction, redistribution , reselling , loan or sub-licensing, systematic supply or distribution in any form to anyone is expressly forbidden. The publisher does not give any warranty express or implied or make any representation that the contents will be complete or accurate or up to da...
متن کاملPrediction of Chatter in CNC Machining based on Dynamic Cutting Force for Ball End Milling
This paper presents the suitable depth of cut, spindle speed and feed rate that will be chosen during machining. If thus parameters are not considered, this can provoke abnormal tool behavior such as chatter. Chatter will limit the tool life which only can be use for just a few times. To predict the chatter occurs, the parameters will be use are spindle speed, depth of cut and feed rate. CNC ma...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 2012
ISSN: 0912-0289,1882-675X
DOI: 10.2493/jjspe.78.975