MAGNETIC ARC WELDING STABILIZATION USING NON-CONSUMABLE ELECTRODE
نویسندگان
چکیده
منابع مشابه
Modelling of Electrode-arc Coupling in Electric Arc Welding
Modelling of the arc in electric arc welding is significant to achieve a better process understanding, thus gain better weld quality and a more efficient production process. It requires knowing the conditions at the surfaces of the anode and cathode. These conditions are very difficult to set from measurements and should be calculated. This requires modelling the complex physics of the electrod...
متن کاملMetal Transfer in Double-Electrode Gas Metal Arc Welding
Gas metal arc welding (GMAW) is the most widely used process for metal joining because of its high productivity and good quality, but analysis shows that the fundamental characteristic restricts conventional GMAW from further increasing the welding productivity. A novel GMAW process, refereed to as double-electrode GMAW or DE-GMAW, thus has been developed to make it possible to increase the mel...
متن کاملConsumable Double - Electrode GMAW Part II : Monitoring
Consumable DE-GMAW is an innovative welding process, which can significantly increase the deposition rate without raising the base metal heat input to an undesired level. To be qualified as a practical manufacturing process, feedback control is required to assure the presence and stability of the bypass arc. To this end, the bypass arc voltage was selected to monitor the state of the bypass arc...
متن کاملGas tungsten arc welding
Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a nonconsumable tungsten electrode to produce the weld. The weld area is protected from atmospheric contamination by a shielding gas (usually an inert gas such as argon), and a filler metal is normally used, though some welds, known as autogenous welds, do not require it. A const...
متن کاملConsumable Double - Electrode GMAW Part I : The Process
Double-Electrode Gas Metal Arc Welding (DE-GMAW) is a novel welding process recently developed to increase welding productivity while maintaining the base metal heat input at a desired low level. In this paper, the DE-GMAW process was improved by replacing its non-consumable tungsten electrode with a consumable welding wire electrode resulting in a new process called consumable DE-GMAW. To unde...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanics and Advanced Technologies
سال: 2017
ISSN: 2522-4255,2521-1943
DOI: 10.20535/2521-1943.2017.79.99348