Magnetic Separation Using Superconducting Bulk Magnets.
نویسندگان
چکیده
منابع مشابه
Superconducting Materials for Magnets
Superconducting materials for magnets will be discussed from three viewpoints: firstly the basic physical properties of the materials themselves, secondly the constraints and preferences imposed by the requirements of magnet building and finally, the manufacture of magnet conductors as a commercial product.
متن کاملSuperconducting Magnets for Detectors
A Fermilab/KEK/University of Tskuba, Japan collaboration is designing a large superconducting solenoid for the Fermilab Collider Detector Facility (CDF). A review of the status of other superconducting solenoids built for colliding beams machines is presented and progress on the design of the CDF magnet is discussed. Two types of superconducting coils appear to be feasible; a bath-cooled cryost...
متن کاملSuperconducting Magnets Development
SIS100: For SIS100 modified versions of the fast-ramped superferric magnets of the Nuclotron synchrotron at JINR Dubna will be used. The original Nuclotron dipole magnets produce an overall AC loss at 4 K of about 38 W/m (standard cycle: Bmax=2 T, dB/dt = 4 T/s, repetition rate of 1 Hz). It is necessary to reduce the loss at cryogenic temperatures at least by a factor of 2, the corresponding R&...
متن کاملSuperconducting pipes and levitating magnets.
Motivated by a beautiful demonstration of the Faraday and the Lenz laws in which a small neodymium magnet falls slowly through a conducting nonferromagnetic tube, we consider the dynamics of a magnet falling coaxially through a superconducting pipe. Unlike the case of normal conducting pipes, in which the magnet quickly reaches the terminal velocity, inside a superconducting tube the magnet fal...
متن کاملPractical adaptation in bulk superconducting magnetic bearing applications
Lifting capacities greater than 41 N/cm2 (60 psi) at 77 K have been achieved using a combination of permanent magnets and high quality melt-textured YBa,Cu,O,-s (YBCO). The key concept of this hybrid superconducting magnetic bearing (HSMB) is the use of strong magnetic repulsion and attraction from permanent magnets to support high loads in conjunction with flux pinning in a type II superconduc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)
سال: 2002
ISSN: 0389-2441,1880-0408
DOI: 10.2221/jcsj.37.697