Maintenance Method of Ground Anchor using Tensile Load and Temperature of Anchor
نویسندگان
چکیده
منابع مشابه
Pullout Load Analysis of Reinforced Concrete Anchor Shafts
In this paper, results obtained in both conventional and finite element analysis of straight and belled anchor shafts subjected to a pullout force are presented. In numerical analysis, it is assumed that no drainage takes place during the anchor pullout. Comparisons between two conventional methods of analysis for ultimate pullout load and the results obtained by the finite element analysis are...
متن کاملLimit analysis of ground anchor forces
An anchored sheet wall is commonly used in retaining deep excavations. Anchor force is one of the critical design parameters in practice. Based on the kinematical admissible failure mechanism, a limit analysis approach to determine the anchor force is presented. The explicit formula for the anchor force is given, which makes it easy to calculate using a simple calculation program such as MS Off...
متن کاملVariation Characteristics of the Anchor Dynamics Testing Signal under Conditions of Tensile Load
Article history: Received: 30.5.2015. Received in revised form: 19.12.2015. Accepted: 20.12.2015. Non-destructive testing for rock bolts in this study considers loads typical of anchors in practical engineering. The non-destructive testing experiment has been conducted for bolts under various load levels with variation characteristics of the dynamic testing signal and analyzed based on the stre...
متن کاملSelection the best Method of Equating Using Anchor-Test Design in Item Response Theory
Explaining the problem. The equating process is used to compare the scores of the two different tests with the same theme. The goal of this research is finding the best method of equating data using Logistic model. Method. we are using the data of Ph.D. test in Statistic major for two consecutive years 92 and 93. For analyzing, we are specifically using the tests of Statistics major ...
متن کاملchemical recycling of polycarbonate waste using conventional heating and microwave assisted method
پلی کربنات یکی از پلاستیکهای مهمی است که به صورت گسترده در تولید لوحهای فشرده، قطعات رایانه، مواد ساختمانی و غیره مورد استفاده قرار می گیرد. این پلیمر بصورت عمده از تراکم مونومر بیس فنولa (bpa) و کربنیل کلرید یا دی متیل کربنات ها بدست می آید. در سالهای اخیر بازیافت شیمیایی پلی کربنات بیشتر مورد توجه بوده است. بازیافت شیمیایی پلی کربنات برای بدست آوردن مواد اولیه آن با روشهای متفاوتی مانند تجزی...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Landslide Society
سال: 2014
ISSN: 1348-3986,1882-0034
DOI: 10.3313/jls.51.237