Manual-scanning optical coherence tomography probe based on position tracking
نویسندگان
چکیده
منابع مشابه
Manual-scanning optical coherence tomography probe based on position tracking.
A method based on position tracking to reconstruct images for a manual-scanning optical coherence tomography (OCT) probe is proposed and implemented. The method employs several feature points on a hand-held probe and a camera to track the device's pose. The continuous device poses tracking, and the collected OCT depth scans can then be combined to render OCT images. The tracking accuracy of the...
متن کاملPaired-angle-rotation scanning optical coherence tomography forward-imaging probe.
We report a novel forward-imaging optical coherence tomography (OCT), needle-probe paired-angle-rotation scanning OCT (PARS-OCT) probe. The probe uses two rotating angled gradient-index lenses to scan the output OCT probe beam over a wide angular arc (approximately 19 degrees half-angle) of the region forward of the probe. Among other advantages, this probe design is readily amenable to miniatu...
متن کاملTracking optical coherence tomography.
An experimental tracking optical coherence tomography (OCT) system has been clinically tested. The prototype instrument uses a secondary sensing beam and steering mirrors to compensate for eye motion with a closed-loop bandwidth of 1 kHz and tracking accuracy, to within less than the OCT beam diameter. The retinal tracker improved image registration accuracy to <1 transverse pixel (<60 microm)....
متن کاملAdvanced scanning methods with tracking optical coherence tomography.
An upgraded optical coherence tomography system with integrated retinal tracker (TOCT) was developed. The upgraded system uses improved components to extend the tracking bandwidth, fully integrates the tracking hardware into the optical head of the clinical OCT system, and operates from a single software platform. The system was able to achieve transverse scan registration with sub-pixel accura...
متن کاملMEMS scanning micromirror for optical coherence tomography.
This paper describes an endoscopic-inspired imaging system employing a micro-electromechanical system (MEMS) micromirror scanner to achieve beam scanning for optical coherence tomography (OCT) imaging. Miniaturization of a scanning mirror using MEMS technology can allow a fully functional imaging probe to be contained in a package sufficiently small for utilization in a working channel of a sta...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Letters
سال: 2009
ISSN: 0146-9592,1539-4794
DOI: 10.1364/ol.34.003400