Masonry Walls under Combined In-Plane and Out-of-Plane Loadings
نویسندگان
چکیده
منابع مشابه
A homogenization approach for the limit analysis of out-of-plane loaded masonry walls
This paper addresses the usage of a simplified homogenization technique for the analysis of masonry subjected to out-of-plane loading. The anisotropic failure surface, based on the definition of a polynomial representation of the stress tensor components in a finite number of sub-domains, is combined with finite element triangular elements employed for the upper and lower bound limit analyses. ...
متن کاملin-plane behavior of confined masonry walls with and without opening
confined masonry buildings are used in rural and urban areas of iran. they performed almost satisfactoryduring past moderate earthquakes of iran. there is not a methodology in iranian seismic code (standard 2800-3rdedition) to estimate their capacities quantitatively. in line with removing this constraint, an attempt is made to studyin-plane behavior of two squared confined masonry walls with a...
متن کاملIn-Plane and out of Plane Free Vibration of U-Shaped AFM Probes Based on the Nonlocal Elasticity
Atomic force microscope (AFM) has been developed at first for topography imaging; in addition, it is used for characterization of mechanical properties. Most researches have been primarily focused on rectangular single-beam probes to make vibration models simple. Recently, the U-shaped AFM probe is employed to determine sample elastic properties and has been developed to heat samples locally. I...
متن کاملEffect of static and kinematic boundary conditions on the out-of-plane response of brick masonry walls
The Unreinforced Wall (URM) elements that are most susceptible to out-of-plane failure are wall elements of the upper storeys where the accelerations are largest. In modern URM buildings with reinforced concrete slabs, the out-of-plane mechanism involves typically a storey-high wall element, which is subjected at its base and top to the accelerations of the corresponding floor slabs. The accele...
متن کاملJournal of Composites for Construction Design of FRP-Strengthened Infill Masonry Walls Subjected to Out-of-Plane Loading
4 FRP strengthening systems for infill masonry walls are typically designed to resist flexural stresses due to out-of5 plane pressure. Previous research has shown that there are potential premature failure mechanisms due to shear 6 sliding of the infill, which could reduce the effectiveness of the strengthening system. Current design guidelines for 7 strengthening of masonry walls with fiber-re...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural Engineering
سال: 2018
ISSN: 0733-9445,1943-541X
DOI: 10.1061/(asce)st.1943-541x.0001930