Material removal mechanism in low-energy micro-EDM process
نویسندگان
چکیده
منابع مشابه
A Review of Micro - EDM
There is a huge demand in the production of microstructures by a non-traditional method which is known as Micro-EDM. Micro-EDM process is based on the thermoelectric energy between the workpiece and an electrode. Micro-EDM is a newly developed method to produce micro-parts which in the range of 50 μm -100 μm. Micro-EDM is an efficient machining process for the fabrication of a micro-metal hole ...
متن کاملInvestigation on the Material Removal Mechanism and the Thermal Aspects in the Electrical Discharge Machining Process
The aim of this paper is to study the Electro discharge machining process. EDM has been an important manufacturing process for the tool, mould, and dies industries for several decades. The process is finding an increasing industrial use owing to its ability to produce geometrically complex shapes as well as its ability to machine hard materials that are extremely difficult using conventional pr...
متن کاملInvestigation and Fuzzy Based Modeling of Micro-edm Process during Machining of Micro-hole in D3 Die Steel Material Employing De-ionized Water
The correct selection of process parameters for manufacturing is one of the most important aspects taken into consideration in the majority of manufacturing processes and particularly, in process related to EDM. The machining characteristics are greatly influenced by the nature of dielectric used during micro-EDM. The present paper investigates the fuzzy logic model for micro-electrical dischar...
متن کاملMICRO-EDM FOR MICRO-CHANNEL FABRICATION ON NONCONDUCTIVE ZrO2 CERAMIC
In this study, microelectro-discharge (micro-ED) milling of nonconductive ZrO2ceramicsis investigated using a Cu tool electrode in kerosene dielectric. An adhesive Cu foil is firmly attached on the workpiece to initiate the sparks. After the machining of Cu foil, an electrically conductive carbonic layer is formed on the ceramic workpiece disassociating the kerosene dielectric, which allows mic...
متن کاملMaterial Removal Mechanism in Chemical Mechanical Polishing: Theory and Modeling
The abrasion mechanism in solid-solid contact mode of the chemical mechanical polishing (CMP) process is investigated in detail. Based on assumptions of plastic contact over wafer-abrasive and pad-abrasive interfaces, the normal distribution of abrasive size and an assumed periodic roughness of pad surface, a novel model is developed for material removal in CMP. The basic model is = removed, wh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CIRP Annals
سال: 2015
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2015.04.040