Mathematical Modeling of Vibration Dampers of Vibration-Insulated Structures
نویسندگان
چکیده
Vibration dampers are installed on the machine foundations in order to reduce vibration level. Such technological solutions most expedient case of a harmonic load with low instability frequency. Unfortunately, do not provide such large reduction dynamic effect base, as isolation, but some cases their efficiency turns out be quite sufficient relatively simple implementation and manufacturing cost. The use gives great when an increased occurs during operation equipment metallurgical production, for example, processing materials by pressure, reconstructing enterprises replacing heavy equipment. During forging manipulators various purposes, these devices can considered rigid body. model soil which this foundation is homogeneous elastic isotropic half-space. When calculating mathematical models, one corresponding contact problems. A comparative analysis effectiveness damping vibrations using different including elastic, half-space system semi-infinite rods, modulus elasticity increases depth according quadratic law, shows fairly close agreement.
منابع مشابه
Electromechanical Dampers for Vibration Control of Structures and Rotors
Viscoelastic and fluid film dampers are the main two categories of damping devices used for the vibration suppression in machines and mechanical structures. Although cost effective and of small size and weight, they are affected by several drawbacks: the need of elaborate tuning to compensate the effects of temperature and frequency, the ageing of the material and their passive nature that does...
متن کاملConstrained Optimal Control of Vibration Dampers
Optimal control of dampers has been proposed to mitigate vibration effects in mechanical systems. In many cases, systems are subject to periodic forcing and the goal is to maximize the energy dissipated by the damper. In contrast to prior work utilizing instantaneous or infinite-time−horizon optimization, this paper employs periodic optimal control to maximize the energy dissipated per cycle. F...
متن کاملEffect of Non-linearity of Connecting Dampers on Vibration Control of Connected Building Structures
The connection of two building structures with dampers is one of the effective vibration control systems. In this vibration control system, both buildings have to possess different vibration properties in order to provide a higher vibration reduction performance. In addition to such condition of different vibration properties of both buildings, the connecting dampers also play an important role...
متن کاملFree vibration analysis of steel framed structures
This study based on free vibration analysis and study the behavior of framed structure under different frequency of vibration using ANSYS software and shaking table. A small scale uni-axial shaking table was prepared in laboratory, which can produce lower to moderate vibration, regarding frequency and velocity. Moment resisting framed structures constructed with connecting beam and column eleme...
متن کاملPerformance of Tuned Liquid Dampers with Different Tank Geometries for Vibration Control of Structures
TLD is a tank filled with water and serves as a dynamic vibration absorber for passive control of structures. This paper addresses the comparisons of TLD performances corresponding to different tank geometries including rectangular and conical shapes. Due to the importance of water and tank weight as a load on top of a building, volume is considered to be a constant parameter in this study. Fir...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Epj Web of Conferences
سال: 2021
ISSN: ['2101-6275', '2100-014X']
DOI: https://doi.org/10.1051/epjconf/202124802009