MATLAB SIMULATION OF D-STATCOM USING SVPWM

D-STATCOM Investigation In Power Quality For Grid Tied Solar Photovoltaic Through Matlab Simulation

Modeling and Simulation of STATCOM for a power system network using MATLAB/SIMULINK

Nowadays, the proliferation of non-linear loads (especially power electronics equipment) leads to deterioration of the quality of voltage waveforms at the point of common coupling (PCC) of various consumers. In view of the wide spread use of harmonics-sensitive electronic equipment, power conditioning equipment is becoming more important for both electric utilities and their customers. With rap...

“Compensation of Reactive Power Using D-STATCOM”

The D-STATCOM is a shunt connected FACTS device which supplies reactive power to the load to improve the voltage stability of the load busses. The D-STAT COM in multi bus system is capable of reducing the losses and improving the voltage regulation.This work deals with comparison of Push Pull and Voltage Inverter based D-STATCOM for multi bus system. Eight bus system is modeled using the elemen...

Simulation of Reactive Power Compensation Using STATCOM

Power quality in distribution systems has been attracting an increasing interest during recent years. Research studies include the quality of voltage supply with connected to the same point of common coupling (PCC). Utility distribution networks, sensitive industrial loads and critical commercial operations suffer from various types of outages and service interruptions which can cost significan...

PSCAD Simulation Model of D-Statcom for Voltage Sag Improvement

This paper deals with the modeling and simulation of Distribution Static Compensator (D-STATCOM) for voltage sag mitigation. The D-STATCOM simulation model consists of 12-pulse inverter, which is connected in shunt with the system. A generalized sinusoidal pulse width modulation (SPWM) technique was developed in the proposed controller for fast control action of the D-STATCOM. Simulations of th...