Measurement and Analysis of Surface Roughness in WS2 Solid Lubricant Assisted Minimum Quantity Lubrication (MQL) Turning of Inconel 718
نویسندگان
چکیده
منابع مشابه
Tool Wear and Surface Roughness Prediction using an Artificial Neural Network (ANN) in Turning Steel under Minimum Quantity Lubrication (MQL)
Tool wear and surface roughness prediction plays a significant role in machining industry for proper planning and control of machining parameters and optimization of cutting conditions. This paper deals with developing an artificial neural network (ANN) model as a function of cutting parameters in turning steel under minimum quantity lubrication (MQL). A feed-forward backpropagation network wit...
متن کاملAnalysis of Minimum Quantity Lubrication (MQL) for Different Coating Tools during Turning of TC11 Titanium Alloy
The tool coating and cooling strategy are two key factors when machining difficult-to-cut materials such as titanium alloy. In this paper, diamond coating was deposited on a commercial carbide insert as an attempt to increase the machinability of TC11 alloy during the turning process. An uncoated carbide insert and a commercial Al₂O₃/TiAlN-coated tool were also tested as a comparison. Furthermo...
متن کاملMinimum Quantity Lubrication (MQL) in Machining: Benefits and Drawbacks
Micro lubrication or also known as minimum quantity lubrication (MQL) serves as an alternative to flood cooling by reducing the volume of cutting fluid used in the machining process; but not without significant health concerns. Flood cooling is primarily used to cool and lubricate the cutting tool and work piece interface during machining process. The adverse health effects caused by the use of...
متن کاملCharacterization of Cutting Parameters in the Minimum Quantity Lubricant (MQL) Machining Process of a Gearbox
This paper aims to find the key process parameters for machining different parts of an automobile gearbox, commissioned by a company that needs to replace with the MQL lubrication system their current machining process based on cutting fluids. It particularly focuses on the definition of appropriate cutting parameters for machining under the MQL condition through a statistical method of Design ...
متن کاملCutting Parameters in the Minimum Quantity Lubricant (mql) Machining Process of a Gearbox
Today one of the top priorities in the machining industry is to increase or retain the profit margin through cost reduction. In addition, consumers are becoming increasingly aware of the impact that the life cycle of products has on the environment, at the time of their choice. So companies are required to research and develop sustainable processes or adapt existing ones. This research has been...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2016
ISSN: 2212-8271
DOI: 10.1016/j.procir.2016.01.082