Measurement and Modeling of the Precipitation Particle Size Distribution
نویسندگان
چکیده
Precipitation plays a vital role within the Earth system [...]
منابع مشابه
Primary Particle Size Distribution Measurement of Nanomaterials by Using TEM
Industrial applications of nano-particles are reported in many fields recently. Regulation of nano-materials is also discussed in Organization for Economic Co-operation and Development (OECD). European Union (EU) announced the definition of nano-material in 2012. According to EU definition, nanomaterial means a natural, incidental or manufactured material containing particles, in an unbound sta...
متن کاملMeasurement of Particle Size Distribution by Acoustic Emission Method
Continuous measurement of size distribution of particles is the necessary parameter regarding the control of some specific production processes. A possible solution is the use of the acoustic emission method which is based on the measurement and analysis of pressure pulses generated by an impact of solid particles against a solid obstacle. Our paper focuses on the practical verification of the ...
متن کاملThe measurement of particle size distribution using the Single Particle Optical Sizing (SPOS) method
A new technique for measuring the Particle Size Distribution (PSD) of a soil, known as Single Particle Optical Sizing (SPOS), has been evaluated. A series of tests were conducted to compare the results obtained from sieve analysis and the SPOS method. It was found that for typical laboratory sands, the SPOS method oversizes particles compared to sieving by 20-30%, as predicted by theoretical an...
متن کاملParticle size distribution and particle mass measurements
Particle size distribution and particle mass measurements at urban, near-city and rural level in the Copenhagen area and Southern Sweden M. Ketzel , P. Wåhlin, A. Kristensson, E. Swietlicki, R. Berkowicz, O. J. Nielsen, and F. Palmgren Department of Atmospheric Environment, National Environmental Research Institute, Roskilde, Denmark Division of Nuclear Physics, Physics Department, Lund Univers...
متن کاملCompressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents
In present research, the foam glass-ceramic composites fabricated by window glass, steel slag and SiC, CaCO3 foaming agents were investigated by press–sintering method. The optimum sintering temperature was obtained at 1200°C with a 3-minutes holding time and 20°C/min heating rate. The optimum pressure level of 80 MPa for achieving the 70 % of relative density was selected. The effec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Atmosphere
سال: 2021
ISSN: ['2073-4433']
DOI: https://doi.org/10.3390/atmos12070819