Measurement of Crack Closure and Evaluation of Near-Threshold Characteristics in Fatigue Crack Growth for A508-3 Steel
نویسندگان
چکیده
منابع مشابه
Analyses of Fatigue Crack Growth and Closure Near Threshold Conditions for Large-Crack Behavior
A plasticity-induced crack-closure model was used to study fatigue crack growth and closure in thin 2024-T3 aluminum alloy under constant-R and constant-Kmax threshold testing procedures. Two methods of calculating crack-opening stresses were compared. One method was based on contact-K analyses and the other on contact crack-openingdisplacement (COD) analyses. These methods gave nearly identica...
متن کاملNear-threshold fatigue crack growth in bulk metallic glass composites
A major drawback in using bulk metallic glasses (BMGs) as structural materials is their extremely poor fatigue performance. One way to alleviate this problem is through the composite route, in which second phases are introduced into the glass to arrest crack growth. In this paper, the fatigue crack growth behavior of in situ reinforced BMGs with crystalline dendrites, which are tailored to impa...
متن کاملOn Crack Closure and Crack Tip Shielding during Fatigue Crack Growth
Fatigue crack growth can be strongly influenced by crack closure, i. e., the contacting of the opposing faces of a fatigue crack above the minimum load in a loading cycle. This crack closure shields the crack tip from the full stress field, but different views are held regarding the extent of this shielding. The type of closure, whether it be plasticity-induced, or roughness-induced may also pl...
متن کاملAn atomistic investigation into the nature of near threshold fatigue crack growth in aluminum alloys
Despite decades of study, the atomic-scale mechanisms of fatigue crack growth remain elusive. Here we use the coupled atomistic–discrete dislocation method, a multiscale simulation method, to examine the influence of dislocation glide resistance on near-threshold fatigue crack growth in an aluminum alloy. The simulations indicate that the threshold increases with an increase in dislocation glid...
متن کاملFracture toughness and fatigue crack growth characteristics of nanotwinned copper
Recent studies have shown that nanotwinned copper (NT Cu) exhibits a combination of high strength and moderate ductility. However, most engineering and structural applications would also require materials to have superior fracture toughness and prolonged subcritical fatigue crack growth life. The current study investigates the effect of twin density on the crack initiation toughness and stable ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1984
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.50.309