Measurement of dynamic fracture toughness by double torsion testing
نویسندگان
چکیده
منابع مشابه
Comparison of three real time techniques for the measurement of dynamic fracture initiation toughness in metals
Three techniques for measuring dynamic stress intensity factor time histories of dynamically loaded stationary modeI cracks are compared as applied to dynamically loaded pre-cracked 6Al–4V titanium alloy specimens. The three techniques are crack opening displacement (COD), dynamic strain gage measurement, and coherent gradient sensing (CGS). The stress intensity factor histories are inferred fr...
متن کاملBehavior of Concrete round Double Beam Fracture Toughness Test Specimens
Laboratory fracture toughness tests of concrete using wedge-loaded round double beam specimens with a length to diameter ratio of 2:1 show two distinctly different specimen behaviors. Either the crack remains in the plane of the notch, and a valid test result can be obtained, or there is lateral cracking around mid-length which invalidates the results. Results of a controlled study show that th...
متن کاملCharacterization of the Edge Crack Torsion (ECT) Test for Mode III Fracture Toughness Measurement of Laminated Composites
The edge crack torsion (ECT) test is designed to initiate mode III delamination growth in composite laminates. An ECT specimen is a rectangular laminate, containing an edge delamination at the laminate mid-plane. Torsion load is applied to the specimens, resulting in relative transverse shear sliding of the delaminated faces. The test data reduction schemes are intended to yield initiation valu...
متن کاملFracture toughness of graphene.
Perfect graphene is believed to be the strongest material. However, the useful strength of large-area graphene with engineering relevance is usually determined by its fracture toughness, rather than the intrinsic strength that governs a uniform breaking of atomic bonds in perfect graphene. To date, the fracture toughness of graphene has not been measured. Here we report an in situ tensile testi...
متن کاملInterfacial Fracture Toughness Measurement and Improvement for Composite/metal Interfaces
Adhesive bonding is enlarging its application range as a practical method for the joining of dissimilar materials in automotives, aircrafts, microelectronics and medical devices industries replacing conventional joining techniques such as welding, bolting and riveting [1-5]. Especially for joining of fiber-reinforced polymer (FRP) composites to other structural materials such as metal, traditio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanical Engineering Journal
سال: 2018
ISSN: 2187-9745
DOI: 10.1299/mej.17-00529