Measurement of temperature rises in the femtosecond laser pulsed three-dimensional atom probe
نویسندگان
چکیده
منابع مشابه
Three-Dimensional Atom Probe Analysis of Carbon Distribution in Low-Temperature Bainite
A bainitic microstructure with fine ferrite plates (20 to 40 nm) in a matrix of high-carbon retained austenite, obtained by isothermal transformation at 200°C, was characterized with an energy-compensated optical position-sensitive three-dimensional atom probe. The average carbon concentration in the austenite was found to be 8.0±1.6 at.% and in the bainitic ferrite 1.1±0.7 at.%. The latter con...
متن کاملEfficient sampling for three-dimensional atom probe microscopy data.
The best calculation of concentration profiles, isoconcentration surfaces or Gibbsian interfacial excesses from three-dimensional atom-probe microscopy data requires a compromise between spatial positioning error and statistical sampling error. For example, sampling from larger spatial regions decreases the statistical error, but increases the error in spatial positioning. Finding the appropria...
متن کاملFemtosecond laser-assisted three-dimensional microfabrication in silica.
We demonstrate direct three-dimensional (3-D) microfabrication inside a volume of silica glass. The whole fabrication process was carried out in two steps:(i) writing of the preprogrammed 3-D pattern inside silica glass by focused femtosecond (fs) laser pulses and (ii) etching of the written structure in a 5% aqueous solution of HF acid. This technique allows fabrication of 3-D channels as smal...
متن کاملIntegration of Three-Dimensional Waveguides by Femtosecond Laser Pulses
When femtosecond laser pulses are focused inside the bulk of transparent materials, the refractive-index change can be induced around the focal volume. This technique has been applied to fabricate three-dimensional photonic structures such as waveguides and couplers inside a wide variety of glasses. In this paper, we present fabrication and integration of three-dimensional waveguides in silica ...
متن کاملThree dimensional microstructuring of biopolymers by femtosecond laser irradiation
A sequence of single femtosecond pulses is used to create a pattern of laser affected spots at increasing depths below the surface of transparent biopolymer samples. Materials with different water contents and mechanical strengths, gelatine, chitosan, synthetic polyvinyl pyrrolidone, and biopolymer-polymer blends, are irradiated near the edge of the sample with an amplified Titanium:Sapphire la...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Physics Letters
سال: 2006
ISSN: 0003-6951,1077-3118
DOI: 10.1063/1.2191412