Measurements of Localized Strain around Crack Tip during Strain Cycling and Some Considerations on Fatigue Crack Extension in Copper.
نویسندگان
چکیده
منابع مشابه
On Crack Closure and Crack Tip Shielding during Fatigue Crack Growth
Fatigue crack growth can be strongly influenced by crack closure, i. e., the contacting of the opposing faces of a fatigue crack above the minimum load in a loading cycle. This crack closure shields the crack tip from the full stress field, but different views are held regarding the extent of this shielding. The type of closure, whether it be plasticity-induced, or roughness-induced may also pl...
متن کاملChanges in Elastic-strain Profiles around a Crack Tip during Tensile Loading and Unloading Cycles
The changes in elastic lattice-strain profiles and plastic zone around the fatigue crack in a compact-tension specimen were investigated during monotonic tensile loading and unloading cycles using neutron diffraction. Spatially-resolved strain measurements were performed on a 316 LN stainless steel to determine the in-plane (parallel to the loading direction) lattice-strain profiles ahead of th...
متن کاملContinuing Crack-tip Deformation and Fracture for Plane-strain Crack Growth in Elastic-plastic Solids
ANALYSIS of the deformation field consistent with a Prandtl stress distribution travelling with an advancing plane-strain crack reveals the functional form of the near tip crack profile in an elastic-plastic solid. The crack opening 6 is shown to have the form 6 N r In (const./r) at a distance r from the tip. This observation coupled with data generated from finite element investigations of gro...
متن کاملPlane Strain Deformations of Locking Materials near a Crack Tip
Plane-strain deformations of an isotropic and homogeneous Hookean body containing a crack are studied and it is required that the dilatation everywhere in the body be. greater than or equal to a constant. Following Prager, the region where the dilatation always equals the constant is identified as the locking region. For the case when the deformations of the body are symmetrical about the plane...
متن کاملStrain and texture evolution during mechanical loading of a crack tip in martensitic shape-memory NiTi
In situ synchrotron X-ray diffraction measurements are used to create two-dimensional maps of elastic strain and texture, averaged over a compact-tension specimen thickness, near a crack tip in a martensitic NiTi alloy. After fatigue crack propagation, the material ahead of the crack and in its wake exhibits a strong texture, which is eliminated by subsequent shape-memory heat treatment, indica...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1993
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.59.674