Measuring and Modeling Viscosity of CaO-Al2O3-SiO2(-K2O) Melt
نویسندگان
چکیده
منابع مشابه
Measuring and Modeling Viscosity of CaO-Al2O3-SiO2(-K2O) Melt
The effect of K2O on viscosity in CaO-SiO2-Al2O3 melt has been measured by a rotating spindle viscometer. It is indicated from the experimental results that viscosity first increases then decreases with the increasing content of K2O; the maximum viscosity occurs in the field of K2O/ Al2O3 > 1. After gradually adding K2O, the transformation of bridging oxygen (from being bonded with Al ion charg...
متن کاملViscosity and diffusion of barium and fluoride in Na2O/K2O/Al2O3/SiO2/BaF2 glasses
The interdiffusion coefficients of barium and fluoride in glasses, in the system Na2O/K2O/Al2O3/SiO2 with BaF2 additions, were determined from the diffusion profiles using energy dispersive X-ray analysis in a scanning electron microscope. The diffusivities were in agreement with Arrhenius-equation. Diffusion coefficients of fluoride were in the range from 4.5 10 15 m s 1 to 30 10 15 m s 1 at 5...
متن کاملSynthesis of Nanoscale CaO-Al2O3-SiO2-H2O and Na2O-Al2O3-SiO2-H2O Using the Hydrothermal Method and Their Characterization
C-A-S-H (CaO-Al₂O₃-SiO₂-H₂O) and N-A-S-H (Na₂O-Al₂O₃-SiO₂-H₂O) have a wide range of chemical compositions and structures and are difficult to separate from alkali-activated materials. Therefore, it is difficult to analyze their microscopic properties directly. This paper reports research on the synthesis of C-A-S-H and N-A-S-H particles with an average particle size smaller than 300 nm by apply...
متن کاملIntrinsic viscosity of SiO2, Al2O3 and TiO2 aqueous suspensions.
The viscosity of dilute suspensions of several metal oxides (SiO2, Al2O3 and TiO2) was measured at different pH values. The intrinsic viscosity, [eta], was derived from the concentration dependence of the viscosity. This magnitude was pH-dependent. A correlation with the shape of the kinetic unity has been proposed.
متن کاملdesulfurization of plain carbon steel by cao-al2o3-sio2 and cao-al2o3-sio2-x (x = na2o, sro) synthetic slags
synthetic slag process decreases sulfur and phosphorus contents of steel, improves inclusion removal, protects steel from atmosphere and prevents temperature drop of the liquid steel in the ladle. in this study, the synthetic slags of ternary cao-al2o3-sio2,and quaternary cao-al2o3-sio2-na2o and cao-al2o3-sio2-sro systems were pre-melted and then were kept in contact with the liquid steel in a ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions B
سال: 2012
ISSN: 1073-5615,1543-1916
DOI: 10.1007/s11663-012-9668-9