Measuring thermal characteristics of the heat exchanger
نویسندگان
چکیده
منابع مشابه
Intermediate Heat Exchanger Dynamic Thermal Response
This report presents UCB progress in developing a comprehensive thermal and fluid dynamics model for the NGNP intermediate heat exchanger (IHX) and other compact heat exchangers. For nuclear hydrogen applications, an IHX is required to transfer heat from high temperature and high-pressure primary helium coolant to a hydrogen production process. An intermediate heat transfer loop is used for the...
متن کاملThe Overall Heat Transfer Characteristics of a Double Pipe Heat Exchanger: Comparison of Experimental Data with Predictions of Standard Correlations
The single-phase flow and thermal performance of a double pipe heat exchanger are examined by experimental methods. The working fluid is water at atmospheric pressure. Temperature measurements at the inlet and outlet of the two streams and also at an intermediate point half way between the inlet and outlet is made, using copper-constantan thermocouple wires. Mass flow rates for each stream are ...
متن کاملEffect of Corrugated Baffles on the Flow and Thermal Fields in a Channel Heat Exchanger
The performance of corrugated baffles inserted in a rectangular channel heat exchanger is investigated. The fluid flows and thermal distribution are determined via numerical simulations. The working fluid has a shear thinning behavior. The influence of the baffle design is explored, we interest to the “wavy” shape. The corrugation angle of baffle (α) is changed from 0° (i.e. a straight...
متن کاملThermal Characteristics of a Primary Surface Heat Exchanger with Corrugated Channels
This paper presents the heat transfer and pressure drop characteristics of a primary surface heat exchanger (PSHE) with corrugated surfaces. The PSHE was experimentally investigated for a Reynolds number range of 156–921 under various flow conditions on the hot and cold sides. The inlet temperature of the hot side was maintained at 40 ̋C, while that of the cold side was maintained at 20 ̋C. A c...
متن کاملThermal/Fluid Characteristics of 3-D Woven Mesh Structures as Heat Exchanger Surfaces
The present work demonstrates the fabrication methodology of a three-dimensional (3-D), aluminum wire filament, bonded mesh deployed as a heat exchange surface. A model of the effective thermal conductivity of the mesh is developed. Apparatus to measure the coolant pressure-drop and heat transfer coefficient are described. Measurements are reported for fabricated test samples of varying thickne...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: EPJ Web of Conferences
سال: 2012
ISSN: 2100-014X
DOI: 10.1051/epjconf/20122501041