Mechanical Abrasion of Mortars Containing Clinoptilolite
نویسندگان
چکیده
منابع مشابه
Characterization of Mechanical and Bactericidal Properties of Cement Mortars Containing Waste Glass Aggregate and Nanomaterials
The recycling of waste glass is a major problem for municipalities worldwide. The problem concerns especially colored waste glass which, due to its low recycling rate as result of high level of impurity, has mostly been dumped into landfills. In recent years, a new use was found for it: instead of creating waste, it can be recycled as an additive in building materials. The aim of the study was ...
متن کاملPhysico-Mechanical Properties of Organo-Modified Bentonite Reinforced Cement Mortars
It is demonstrated that the addition of organo-modified Na-bentonite (OMB) particles to Portland cement mortar can promote its physical and mechanical properties. A series of experimental works on some important physico-mechanical properties of Portland cement mortars mixed with various dosages of hydrophobic OMB were performed. The obtained results confirm that the OMB provides a dense packing...
متن کاملMechanical Abrasion and Intercrown Spacing
The crowns of neighboring trees of similar height do not interdigitate but rather are generally separated by spaces called "crown shyness" gaps. In a black mangrove (Avicennia germinans) forest in Costa Rica, the width of crown shyness gaps was positively correlated with the distance pairs of trees or branches adjacent to the gap swayed in the wind (n = 22; p< .01). Abrasion of buds, leaves and...
متن کاملThermo-Mechanical Compatibility of Viscoelastic Mortars for Stone Repair
The magnitude of the thermal stresses that originate in an acrylic-based repair material used for the reprofiling of natural sandstone is analyzed. This kind of artificial stone was developed in the late 1970s for its peculiar property of reversibility in an organic solvent. However, it displays a high thermal expansion coefficient, which can be a matter of concern for the durability either of ...
متن کاملMechanical Properties of Composite Mortars Using Flurogypsum and PVC Particles
The present work describes the viability of a mortar binder based on two industrial by-products: poly(vinyl chloride) (PVC) particles from scrap and anhydrite (CaSO4) from fluorgypsum. Mortar composites were made incorporating different amounts of PVC particles and cured at constant room temperature during various periods of time. From X-ray diffraction, it was possible to follow the hydration ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nevşehir Bilim ve Teknoloji Dergisi
سال: 2019
ISSN: 2148-466X
DOI: 10.17100/nevbiltek.447309