Mechanical and Self-Sensing Properties of Multiwalled Carbon Nanotube-Reinforced ECCs
نویسندگان
چکیده
منابع مشابه
Mechanical and rheological properties of carbon nanotube-reinforced polyethylene composites
This paper investigates some mechanical and rheological properties of low density polyethylene (LDPE) composites reinforced by multi-walled carbon nanotubes (MWNTs). It was found that the Young’s modulus and tensile strength of the composites can increase by 89% and 56%, respectively, when the nanotube loading reaches 10 wt%. The curving and coiling of MWNTs play an important role in the enhanc...
متن کاملEffects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties
In this paper, experimental and Finite Element Methods have been used to determine mechanical properties of nanocomposites. Standard tensile and compression samples with 0.0, 0.15, 0.25, 0.35, 0.45, and 0.55 weight fraction of Multi-Walled Carbon Nanotube (MWCNT) were prepared and tested. Nanotube weight fraction was varied to investigate the effects of nanotube weight fraction on nanocomposite...
متن کاملOnto the internal strain self-sensing properties of single walled carbon nanotube-reinforced epoxies
Non destructive, real-time monitoring of the stress/strain state of polymer composites can be achieved through a “nanomodification” of the matrix. Due to their high Raman scattering, electrical conductivity and implicit sensitivity to pressure and temperature, single-walled carbon nanotubes (SWCNT) are ideal elements to fulfil this task. In this work, SWCNT at a loading fraction as low as 0.1 w...
متن کاملdetermination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولStrain sensing using a multiwalled carbon nanotube film
The effectiveness of multiwalled carbon nanotubes (MWCNTs) as strain sensors is investigated. The key contribution of this paper is the study of real-time strain response at the macroscale of MWCNT film under tensile load. In addition, real-time voltage change as a function of temperature is examined. MWCNT films attached to a brass specimen by epoxy using vacuum bonding have been studied. The ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Materials Science and Engineering
سال: 2019
ISSN: 1687-8434,1687-8442
DOI: 10.1155/2019/2646012