Mechanical behavior of mullite-zirconia composites
نویسندگان
چکیده
منابع مشابه
Zirconia-spinel composites. Part II: mechanical properties
The mechanical properties (fracture strength, fracture toughness, and Vickers microhardness) of MgAl2O4 and x wt% ZrO2–MgAl2O4 (1 # x # 30) hot-pressed materials were measured at room temperature. Two kinds of materials, which were prepared from either ball-milled or attrited powders, were investigated. Compared with an unreinforced spinel, a twofold (or greater) increase in both strengthening ...
متن کاملSuperplastic Flow of Two-Phase Ceramics Containing Rigid lnclusions— Zirconia/Mullite Composites
A continuum theory for non-Newtonian flow of a two-phase composite containing rigid inclusions is presented. I t predicts flow suppression by a factor of (1 V)p, where V is the volume fraction of the rigid inclusion and q depends on the stress exponent and the inclusion shape. Stress concentrations in the rigid inclusion have also been evaluated. As the stress exponent increases, flow suppressi...
متن کاملComparison of the effect of chromium oxide and magnesium oxide on the mechanical properties and microstructure of alumina-mullite-zirconia composites
Alumina-mullite-zirconia composites were prepared by the reaction sintering method between alumina and zircon powders and the effect of two additives (chromium oxide and manganese oxide)were investigated on their properties. 2 and 4 wt% of each oxide were added to the raw material composition and after pressing, the samples were sintered at 1630°C. The results showed that chromium oxide decreas...
متن کاملElaboration of Alumina-Zirconia Composites: Role of the Zirconia Content on the Microstructure and Mechanical Properties
Alumina-zirconia (AZ) composites are attractive structural materials, which combine the high hardness and Young's modulus of the alumina matrix with additional toughening effects, due to the zirconia dispersion. In this study, AZ composites containing different amounts of zirconia (in the range 5-20 vol %) were prepared by a wet chemical method, consisting on the surface coating of alumina powd...
متن کاملSpark Plasma Sintered Hydroxyapatite – Zirconia Composites: Structural and Mechanical Properties
Hydroxyapatite (Ca10(PO4)6(OH)2) (HAp) is a very attractive material for human tissue implantation, beacuse it makes up ~69% of the weight of bone [1]. Unfortunately HAp posses low mechanical properties (strength, fracture toughness), which is a barrier to its applications in load-bearing situations [2]. The mechanical properties of HAp composites, is based on the synthesis of composites and th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: EPJ Web of Conferences
سال: 2010
ISSN: 2100-014X
DOI: 10.1051/epjconf/20100620005