Mechanical behaviour of dissimilar friction stir welded tailor welded blanks in Al–Mg alloys for Marine applications
نویسندگان
چکیده
منابع مشابه
Finite element analysis of tailor-welded blanks
A typical tailor-welded blank (TWB) is composed of several base metals, which might have di!erent mechanical properties as well as thickness. Moreover, a TWB contains a heat-a!ected zone (HAZ) which has quite di!erent mechanical properties from base materials. The forming behaviors of TWBs have been widely studied since they were "rst developed as a way of using collectible o!al. They are often...
متن کاملSuperplastically Formed Friction Stir Welded Tailored Aluminum and Titanium Blanks for Aerospace Applications
The purpose of this study was to develop a specialized Friction Stir Welding process for superplastic grade aluminum alloy 5083-SP and titanium alloy 6Al-4V, in thickness of 1.5 to 4 mm, such that the butt welded nugget would have equal superplastic forming (SPF) characteristics as the parent sheet material The concept of using tailored blanks for the SPF process is proposed which will allow th...
متن کاملEffect of tool position on microstructural and mechanical properties of friction stir butt welded joint of AA2024–AA7075 dissimilar alloys
In this research, butt joining of Al2024 and Al7075 plates were performed by Friction Stir Welding (FSW) and the effect of tool position on microstructural and mechanical properties in about 1 mm from center line of joint towards the advancing side (AS) and the retreating side (RS) was investigated at three positions of +1, 0, -1 mm. In this regard, the plates of Al2024 and Al7075 were selected...
متن کاملThe Strength of Friction Stir Welded and Friction Stir Processed Aluminium Alloys
Local strength of friction stir (FS) welds and FS processed aluminium alloys in heat treatable aluminium alloys is dominated by precipitation hardening. Strengthening due to stored dislocations is generally limited to 40MPa, and grain size strengthening is generally less than 10MPa. Local crystallographic texture can cause yield strength variation on the order of 5%. Published models for streng...
متن کاملEvaluation of microstructure and mechanical properties of friction stir welded copper / 316L stainless steel dissimilar metals
In the present research, friction stir welding (FSW) process was used for butt joining of pure copper plate to 316L stainless steel plate. Mechanical properties and microstructural characteristics of the joint were evaluated by microhardness and tensile tests as well as optical and scanning electron microscope (SEM). It was found that microstructure of the weld nugget (WN) has fine grains where...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2014
ISSN: 0261-3069
DOI: 10.1016/j.matdes.2014.02.042