Mechanical Bonding Process to Manufacture Clad Materials-Divided Flow Bonding.
نویسندگان
چکیده
منابع مشابه
Wire-bonding process development for low-k materials
A 60-lm bond-pad-pitch wire-bonding process was developed using test dies with a SiO2 dielectric layer under aluminium pads, and was then fine-tuned for a low-k device using three types of gold wires with different mechanical properties. Bulk material hardness of the wires were characterised using a wire-bonding machine, the force applied and diameters of squashed free-air balls. It was found t...
متن کاملAdhesive Bonding of Wood Materials
Adhesion to Wood 9–1 Surface Properties of Wood Adherends 9–2 Extractives on Surfaces 9–3 Knifeand Abrasive-Planed Surfaces 9–3 Veneer Surfaces 9–4 Surfaces of Wood and Nonwood Composite Products 9–5 Physical Properties of Wood Adherends 9–6 Density and Porosity 9–6 Moisture Content and Dimensional Changes 9–7 Adhesives 9–9 Composition 9–9 Health and Safety 9–10 Strength and Durability 9–10 Adh...
متن کاملInvestigation of Mechanical Properties for Commercial Purity Titanium Severely Plastic Deformed by Accumulative Roll-bonding Process
In this study accumulative roll bonding (ARB) process up to 8 Cycles (equivalent strain of 6.4) at ambient temperature was used in order to improve the mechanical properties of Commercial purity titanium (CP-Ti).Several experiment has been done and Mechanical properties of specimen has been discussed. For investigating optical microscope punching and hardness test were utilized. This is the fir...
متن کاملInvestigation of Mechanical Properties for Commercial Purity Titanium Severely Plastic Deformed by Accumulative Roll-bonding Process
In this study accumulative roll bonding (ARB) process up to 8 Cycles (equivalent strain of 6.4) at ambient temperature was used in order to improve the mechanical properties of Commercial purity titanium (CP-Ti).Several experiment has been done and Mechanical properties of specimen has been discussed. For investigating optical microscope punching and hardness test were utilized. This is the fir...
متن کاملDirect Photonic Fusion of Vitrified Bonding Materials
The purpose of this study is to show the effects of the direct fusion of raw materials used for vitrified grinding wheels by photonic interactions. The paper describes the construction of a sintering apparatus that employs a pulsed neodymium: yttrium aluminum garnet (Nd:YAG) laser to fuse a combination of raw materials such as ball clay, feldspar, and borax to form a partially-crystalline glass...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2003
ISSN: 0915-1559
DOI: 10.2355/isijinternational.43.373