Mechanical Performance Evaluation of Cement Paste with Foaming Agent using FEM Analysis Based on Picture Image

Image analysis of cement paste: relation to diffusion transport

Computed Tomographic Image Analysis Based on FEM Performance Comparison of Segmentation on Knee Joint Reconstruction

The demand for an accurate and accessible image segmentation to generate 3D models from CT scan data has been increasing as such models are required in many areas of orthopedics. In this paper, to find the optimal image segmentation to create a 3D model of the knee CT data, we compared and validated segmentation algorithms based on both objective comparisons and finite element (FE) analysis. Fo...

evaluation of keratinized on overdenture implant success

چکیده ندارد.

Fly Ash-based Geopolymer Lightweight Concrete Using Foaming Agent

In this paper, we report the results of our investigation on the possibility of producing foam concrete by using a geopolymer system. Class C fly ash was mixed with an alkaline activator solution (a mixture of sodium silicate and NaOH), and foam was added to the geopolymeric mixture to produce lightweight concrete. The NaOH solution was prepared by dilute NaOH pellets with distilled water. The ...

Mechanical Energy Dissipation Using Cement-Based Materials with Admixtures

ACI Materials Journal, V. 110, No. 3, May-June 2013. MS No. M-2011-272.R1 received April 5, 2012, and reviewed under Institute publication policies. Copyright © 2013, American Concrete Institute. All rights reserved, including the making of copies unless permission is obtained from the copyright proprietors. Pertinent discussion including author’s closure, if any, will be published in the March...