Mechanical Performance of 3D-Printed Cornstarch–Sandstone Sustainable Material
نویسندگان
چکیده
The objective of this research is the improvement physical properties artificial sandstone in order to obtain a printable construction material whose composition and structure suitable for design, study environmentally friendly architectural structures. To investigate suitability researched 3D printing determine mechanical starch-based 3D-printed material, both cylindrical cellular samples were designed. starch–sandstone was found have satisfactory properties.
منابع مشابه
Fatigue Characterization of 3d Printed Elastomer Material
The Objet PolyJet 3D Printing process provides the ability to print graded materials featuring both stiff and elastomeric polymers. This capability allows for a variety of new design possibilities for additive manufacturing such as living hinges, shock absorbing casings, and integrated gaskets. Such design features typically rely upon the ability of traditional elastomers to experience large an...
متن کاملAcoustic Performance of 3D Printed Nanocomposite Earmuff
INTRODUCTION Hearing protection devices are one of the primary noise reduction tools in developing countries. This study is intended to produce and apply acrylonitrile butadiene styrene (ABS)/clay nanocomposites to fabricate a laboratory single cup earmuffs and then compare it with double cup and single cup pure ABS earmuffs in terms of noise attenuation performance and comfort. In addition, th...
متن کاملUntethered Hovering Flapping Flight of a 3D-Printed Mechanical Insect
This project focuses on developing a flapping-wing hovering insect using 3D-printed wings and mechanical parts. The use of 3D printing technology has greatly expanded the possibilities for wing design, allowing wing shapes to replicate those of real insects or virtually any other shape. It has also reduced the time of a wing design cycle to a matter of minutes. An ornithopter with a mass of 3.8...
متن کاملSintering Mechanisms and Mechanical Properties of 3D Printed Metals
Nickel and iron based alloys are widely used as raw materials in 3D printing or additive manufacturing process. In direct metal laser sintering (DMLS) process, a primary 3D printing technique for metals, metallic powders are sintered to a desired shape by heat energy from a laser beam. This study presents a molecular dynamics study to simulate the sintering process and resultant mechanical prop...
متن کامل3D–4D Printed Objects: New Bioactive Material Opportunities
One of the main objectives of 3D printing in health science is to mimic biological functions. To reach this goal, a 4D printing might be added to 3D-printed objects which will be characterized by their abilities to evolve over time and under external stimulus by modifying their shape, properties or composition. Such abilities are the promise of great opportunities for biosensing and biomimetic ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sustainability
سال: 2023
ISSN: ['2071-1050']
DOI: https://doi.org/10.3390/su15118681