Mechanical Properties and Planar Anisotropy of TC1 Titanium Alloy Sheet
نویسندگان
چکیده
منابع مشابه
determination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولMechanical Properties and Corrosion Behavior of a Beta Titanium Alloy
Recently, people devote to the development of beta titanium alloys which have better biocompatibility because of the addition of Mo, Nb, Ta, Zr, Sn, et al. In this paper, the effects of heat treatment and cold roll deformation on the mechanical properties of the Ti-11.3Mo-6.6Zr-4.3Sn alloy (TMZS) are investigated by tensile test. The results show that the excellent combination of strength and d...
متن کاملEFFECT OF FINISH ROLLING TEMPERATURE ON MICROSTRUCTURE,TEXTURE AND PLANAR ANISOTROPY IN ALUMINUM ALLOY AA3004 SHEETS
AA3004 alloy is widely used in can making. The major concern in the production of canbodies is earing, which develop by high planar anisotropy of rolled sheet. Balance ofrecrystallisation and rolling textures together with a uniform and fine grain microstructure canminimize the earing. The effects of finish rolling temperature (FRT) on planar anisotropy,microstructure, texture development and m...
متن کاملComparison of mechanical and biological properties of zirconia and titanium alloy orthodontic micro-implants
OBJECTIVE The aim of this study was to compare the initial stability as insertion and removal torque and the clinical applicability of novel orthodontic zirconia micro-implants made using a powder injection molding (PIM) technique with those parameters in conventional titanium micro-implants. METHODS Sixty zirconia and 60 titanium micro-implants of similar design (diameter, 1.6 mm; length, 8....
متن کاملMechanical properties and microstructural evolution of vacuum hot-pressed titanium and Ti-6Al-7Nb alloy.
Hot-pressing is a powder metallurgy process where loose powder is loaded into a mould, usually of graphite, and sintered by the simultaneous application of high temperature and pressure. In this study elemental titanium and Ti-6Al-7Nb alloy powders are hot-pressed under different conditions in order to study the influence of the processing parameters on the microstructure and mechanical propert...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Rare Metal Materials and Engineering
سال: 2017
ISSN: 1875-5372
DOI: 10.1016/s1875-5372(17)30095-4