Mechanical properties and thermal expansion behaviour in leucite containing materials

The effect of cesium-containing leucite additions on the thermal and mechanical properties of two leucite-based porcelains.

It has been demonstrated that a Cs(2)O-stabilized leucite porcelain was susceptible to a stress-induced phase transformation, but toughening was not observed.1 It was hypothesized that if Cs(2)O-stabilized leucite core particles were added to a cesium-free matrix porcelain, selected or designed to enhance the toughening mechanism, toughening would occur. A commercial porcelain (VP) and a synthe...

Fabrication and Mechanical Properties of Sintered Leucite Body

for leucite using natural minera} potash feldspar as the major raw material, followed by bal) milling. A sintered leucite body with a 99.0% re)atiye density was obtained by heating the leucite powder cylindrical pellet at 12500C for 1 h. The mechanical properties of this dense teucite body were determined. The bending strength, fracture toughness, e)astic modulus and Vickers hardness of the bod...

determination of some physical and mechanical properties red bean

چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...

Mechanical properties of materials

Studies on mechanical strength, thermal expansion of layering porcelains to alumina and zirconia ceramic core materials.

The aim of this study was to evaluate and clarify the various mechanical properties and behavior of layering porcelains (Tokuyama Dental Ceramic, IPS Empress 2, Cerabien, Vitadura, Creation) used for veneering high-strength ceramic core materials. The layering porcelains studied exhibited the following range of mechanical properties: compressive strength at 586-1091 MPa, bending strength at 30-...