Mechanical properties evaluation for thin film/substrate material systems

modification of nanoclay for improving the physico-mechanical properties of dental adhesives

هدف اصلی این مطالعه تهیه یک سامانه نوین چسب عاجی دندانی بر پایه نانورس پیوند شده با پلی متاکریلیک اسید، نانورس پیوند شده با پلی اکریلیک اسید، مخلوط نانوسیلیکا و نانورس پیوند شده با پلی متاکریلیک اسید، مخلوط نانوسیلیکا و نانورس پیوند شده با پلی اکریلیک اسید و نانورس پیوند شده با کیتوسان اصلاح شده با گلایسیدیل متاکریلات است. پیوند پلی متاکریلیک اسید و پلی اکریلیک اسید بر ری سطح نانورس در حضور و ...

Mechanical Properties of Nacre as a Model for Implant Material

INTRODUCTION: One of the most important properties of implant materials for joint arthroplasty is their wear resistance. Because of their excellent wear properties, ceramic materials have found application in particular in total hip arthroplasty; however, brittle failure remains a serious problem. Basic research has thus been focused on nacre, a natural composite consisting of imbricated aragon...

Acoustomotive optical coherence elastography for measuring material mechanical properties.

Acoustomotive optical coherence elastography (AM-OCE), a dynamic and internal excitation optical coherence elastography technique, is reported. Acoustic radiation force was used for internal mechanical excitation, and spectral-domain optical coherence tomography was used for detection. Mechanical properties of gelatin tissue phantoms were measured by AM-OCE and verified using rheometry results....

Mechanical Properties of Ultrananocrystalline Diamond Thin Films for MEMS Applications

Microcantilever deflection and the membrane deflection experiment (MDE) were used to examine the elastic and fracture properties of ultrananocrystalline diamond (UNCD) thin films in relation to their application to microelectromechanical systems (MEMS). Freestanding microcantilevers and membranes were fabricated using standard MEMS fabrication techniques adapted to our UNCD film technology. Ela...

Mechanical Properties Evaluation of Bulk and Coated Material by Depth Sensing Indentation