Mechanical Properties of Chopped Carbon Fiber Reinforced Epoxy Composites
نویسندگان
چکیده
منابع مشابه
Effect of Chopped Carbon Fiber on Electrical and Thermal properties of Carbon Reinforced Epoxy Composites
This work presents an insight into the effect of conductive filler content on both electrical and thermal properties of a polymer composite system. The electrical conductivity of an insulating polymer can be achieved by dispersing conducting fillers (e.g., metal, graphite powder, carbon black, carbon fiber) in the polymer matrix. The resulting materials are referred to as conducting polymer com...
متن کاملFracture Toughness and Mechanical Properties of Aluminum Oxide Filled Chopped Strand Mat E-Glass Fiber Reinforced–Epoxy Composites
The knowledge of load bearing characteristics and failure of material is very important for mechanical engineers. Various metallic, non metallic and composite materials are used in different application. In view of this, the main objective of the present work is to analyze the influence of Aluminum Oxide filler on Fracture Toughness properties of Chopped Strand Mat (CSM) E-Glass Fiber reinforce...
متن کاملImpact and Hardness Properties of Areca Fiber-Epoxy Reinforced Composites
Natural Fibers composites are considered to have potential use as reinforcing material in polymer matrix composites because of their good strength, stiffness, low cost, environmental friendly and biodegradable. In present study, mechanical properties for natural fiber composites were evaluated. Here, areca fiber is used as new natural fiber reinforcement and epoxy resin as matrix. The extracted...
متن کاملEnhancement of mechanical and electrical properties of continuous-fiber-reinforced epoxy composites with stacked graphene
Impregnation of expandable graphite (EG) after thermal treatment with an epoxy resin containing surface-active agents (SAAs) enhanced the intercalation of epoxy monomer between EG layers and led to further exfoliation of the graphite, resulting in stacks of few graphene layers, so-called "stacked" graphene (SG). This process enabled electrical conductivity of cured epoxy/SG composites at lower ...
متن کاملCreep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites
The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Physica Polonica A
سال: 2016
ISSN: 0587-4246,1898-794X
DOI: 10.12693/aphyspola.130.297