Mechanical Properties of Injection Molded Products Fabricated by Direct Fiber Feeding Injection Molding
نویسندگان
چکیده
منابع مشابه
Microstructure and mechanical properties of titanium components fabricated by a new powder injection molding technique
A powder injection molding (PIM) binder system has been developed for reactive metals such as titanium that employs an aromatic compound as the primary component to facilitate easy binder removal and mitigate problems with carbon contamination. In the study presented here, we examined the densification behavior, microstructure, and mechanical properties of titanium specimens formed by this proc...
متن کاملOn the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding
Powder Injection Molding (PIM) is a precision manufacturing process used for production of advanced composites. Mixing of polymeric binder with metal powders, molding of feedstock, de-binding of brown parts and sintering of green samples are four main steps of this process. In the present study, the compounds containing multi-component binder system and aluminum/ nano-alumina (0-9 wt.%) powders...
متن کاملFiber Orientation in Injection Molded Long Carbon Fiber Thermoplastic Composites
A set of edge-gated and center-gated plaques were injection molded with long carbon fiber-reinforced thermoplastic composites, and the fiber orientation was measured at different locations of the plaques. Autodesk Simulation Moldflow Insight (ASMI) software was used to simulate the injection molding of these plaques and to predict the fiber orientation, using the Anisotropic Rotary Diffusion an...
متن کاملPVT Properties of Polymers for Injection Molding
PVT (Pressure-Volume-Temperature) properties of polymers are important for both engineering and polymer physics. Fig.1 shows the typical PVT diagrams of an amorphous (a) and semi-crystalline polymer (b). PVT diagram describes the specific volume as a function of pressure and temperature. Specific volume increases with the temperature increasing. There is a thermal transition in the polymer. The...
متن کاملFailure strengths of denture teeth fabricated on injection molded or compression molded denture base resins.
STATEMENT OF PROBLEM Denture tooth fracture or debonding remains a common problem in removable prosthodontics. PURPOSE The purpose of this in vitro study was to explore factors determining failure strengths for combinations of different denture tooth designs (shape, materials) and injection or compression molded denture base resins. MATERIAL AND METHODS Three central incisor denture tooth d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2016
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2016.05.039