Mechanical properties of titanium carbonitride reinforced alumina tool composites

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mechanical properties of aluminium-based metal matrix composites reinforced with -alumina platelets

The tensile properties of an aluminium-based metal matrix composite reinforced with a-alumina platelets were investigated from an experimental and a theoretical point of view. An increase in Young modulus, 0,2% proof stress, flow stress and ultimate tensile strength was observed over the unreinforced metal. These improvements were obtained at the expense of the tensile ductility. The experiment...

متن کامل

A novel structure for carbon nanotube reinforced alumina composites with improved mechanical properties.

Engineering ceramics have high stiffness, excellent thermostability, and relatively low density, but their brittleness impedes their use as structural materials. Incorporating carbon nanotubes (CNTs) into a brittle ceramic might be expected to provide CNT/ceramic composites with both high toughness and high temperature stability. Until now, however, materials fabrication difficulties have limit...

متن کامل

Microstructure and mechanical properties of pressureless sintered alumina-silver composites

The silver toughened alumina ceramics, which were fabricated via a conventional ceramic processing route using commercially available alumina and silver oxide powders as the starting materials, exhibit a higher fracture toughness (6 to 9 MPamo.5) than the monolithic alumina ceramic ( 2.5 to 3.0 MPamo.5). The weak interfacial bonding between the silver inclusions and the alumina matrix is charac...

متن کامل

Nanoscaled Mechanical Properties of Cement Composites Reinforced with Carbon Nanofibers

This paper reports the effects of carbon nanofibers (CNFs) on nanoscaled mechanical properties of cement composites. CNFs were added to cement composites at the filler loading of 0.2 wt % (by wt. of cement). Micrographs based on scanning electron microscopy (SEM) show that CNFs are capable of forming strong interfacial bonding with cement matrices. Experimental results using nanoindentation rev...

متن کامل

Mechanical and Tribological Behavior of Aluminum Alloy LM13 Reinforced with Titanium Dioxide Metal Matrix Composites

In the present research work physical, mechanical and tribological behavior of Aluminum (Al) alloy LM13 reinforced with Nano-sized Titanium Dioxide (TiO2) particulates were fabricated, mechanical and tribological properties were investigated. The amount of nano TiO2 particulates in the composite was added from 0.5% to 2% in 0.5 weight percent (wt %) increments. The Al-LM13-TiO2 Metal Matrix Com...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Mechanik

سال: 2018

ISSN: 0025-6552

DOI: 10.17814/mechanik.2018.5-6.55