Mechanical Property of Matrix Hybrid Laminates.
نویسندگان
چکیده
منابع مشابه
Manufacture and Mechanical Properties of Nanocomposite Laminates
This work mainly aims to manufacture nanocomposite laminates at first. The prepreg AS-4 graphite/PolyEtherEtherKetone laminates were used to make a 16-layered APC-2 laminate of 2 mm thick via curing the modified diaphragm. The nanoparticles of Silica (SiO2) were uniformly spread on the specific interfaces totally about 1-3% by weight of a laminate by sol-gel method. Second, by the results of me...
متن کاملHygrothermal Aging of Polyimide Matrix Composite Laminates
Two polyimide-matrix systems were subjected to a series of hygrothermal aging experiments at various temperatures and relative humidities. For each aging condition, we measured the microcracking fracture toughness as a function of aging time. The toughness decreased with time. The rate of decrease increased with temperature and relative humidity. All experimental results could be fit to a simpl...
متن کاملDamage Assessment of Drilled Hybrid Composite Laminates
Hole drilling operations are common in fibre reinforced plastics FRP’s to facilitate fastener assembly to other parts in more complex structures. As these materials are non-homogeneous, drilling causes some damages, like delamination, for example. Delamination can be reduced by a careful selection of drilling parameters, drill material and drill bit geometry. In this work two types of laminates...
متن کاملTool Effects on Hybrid Laminates Drilling
Fibre reinforced plastics are increasing their importance as one of the most interesting groups of material on account of their low weight, high strength and stiffness. To obtain good quality holes, it is important to identify the type of material, ply stacking sequence and fibre orientation. In this paper, the drilling of quasi-isotropic hybrid carbon+glass/epoxy plates is analyzed. Two commer...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 2001
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.50.1146