Mechanical rejuvenation in bulk metallic glass induced by thermo-mechanical creep
نویسندگان
چکیده
منابع مشابه
Structural and Mechanical Characterization of Zr58.5Ti8.2Cu14.2Ni11.4Al7.7 Bulk Metallic Glass
Thermal stability, structure and mechanical properties of the multi-component Zr58.5Ti8.2Cu14.2Ni11.4Al7.7 bulk metallic glass have been studied in detail. The glassy material displays good thermal stability against crystallization and a fairly large supercooled liquid region of 52 K. During heating, the alloy transforms into a metastable icosahedral quasicrystalline phase in the first stage of...
متن کاملMechanical performance and fracture behavior of Fe41Co7Cr15Mo14Y2C15B6 bulk metallic glass
The mechanical properties of a new Fe41Co7Cr15Mo14Y2C15B6 bulk glassy alloy were studied by impact bending, compression, and hardness tests carried out at room temperature. The compressive fracture strength, elastic strain to fracture, Young’s modulus and Vickers hardness were measured to be 3.5 GPa, 1.5%, 265 GPa, and 1253 kg mm, respectively. The fracture mode of the glassy alloy under uniaxi...
متن کاملSimulation study of mechanical properties of bulk metallic glass systems
Monolithic bulk metallic glasses (BMGs) exhibit a unique combination of mechanical properties, such as high strength and large elasticity limits, but the lack of ductility is considered the main Achilles’ heel of BMG systems. To increase the competitiveness of BMGs vis-à-vis conventional structural materials, the problem of catastrophic failure via intense plastic strain localization (‘shear ba...
متن کاملExtreme rejuvenation and softening in a bulk metallic glass
Rejuvenation of metallic glasses, bringing them to higher-energy states, is of interest in improving their plasticity. The mechanisms of rejuvenation are poorly understood, and its limits remain unexplored. We use constrained loading in compression to impose substantial plastic flow on a zirconium-based bulk metallic glass. The maximum measured effects are that the hardness of the glass decreas...
متن کاملMg–Y–Cu bulk metallic glass prepared by mechanical alloying and vacuum hot-pressing
We have studied the amorphization behavior of Mg85KxY15Cux (xZ20–40) alloy powders synthesized by mechanical alloying technique. The as-milled powders were mainly amorphous after 10 h of milling. The thermal stability of these Mg85KxY15Cux glassy powders was investigated by differential scanning calorimeter (DSC). The ranges of Tg, Tx and DTx are around 430–459, 467–497, and 30–46 K, respective...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Materialia
سال: 2018
ISSN: 1359-6454
DOI: 10.1016/j.actamat.2018.02.019