Mechanical Simulation of Thermoplastic Composite Fiber Variable-Angle Laminates
نویسندگان
چکیده
منابع مشابه
Strain Measurement of Composite Laminates Using Fiber Bragg Grating Sensors
Fiber Bragg grating(FBG) sensors, one of the fiber optic sensors(FOS), based on the wavelength division multiplexing(WDM) technology are ideally suitable for structural health monitoring of composite materials and structures. Proper monitoring of measurands in FBG sensor systems requires accurate measurement of the Bragg center wavelength, and the ability to track rapid shifts of the wavelength...
متن کاملEnvironmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging
In this article, the effect of hygrothermal aging on mechanical properties of fiber metal laminates (FMLs) and E-glass/epoxy (GE) composites is investigated. First, FML and GE specimens were built using wet lay-up technique under vacuum pressure. Hygrothermal aging simulation was then carried out on both specimen types in distilled water at a constant temperature of 90 °C for 5 weeks. The resul...
متن کاملThermographic Non-Destructive Evaluation for Natural Fiber-Reinforced Composite Laminates
Natural fibers, including mineral and plant fibers, are increasingly used for polymer composite materials due to their low environmental impact. In this paper, thermographic non-destructive inspection techniques were used to evaluate and characterize basalt, jute/hemp and bagasse fibers composite panels. Different defects were analyzed in terms of impact damage, delaminations and resin abnormal...
متن کاملFree Vibration Analysis of Variable Stiffness Composite Laminates with Flat and Folded Shapes
In this article, free vibration analysis of variable stiffness composite laminate (VSCL) plates with flat and folded shapes is studied. In order to consider the concept of variable stiffness, in each layer of these composite laminated plates, the curvilinear fibers are used instead of straight fibers. The analysis is based on a semi-analytical finite strip method which follows classical laminat...
متن کاملExamining the Relationship Between Ballistic and Structural Properties of Lightweight Thermoplastic Unidirectional Composite Laminates
The pursuit for lightweight personal protection (helmets, body armor, etc.) has been a key issue for the Army in recent years. Previous efforts have shown that the variation of orientation and architecture in ultra-high molecular weight polyethylene (UHMWPE) composite panels can significantly affect ballistic performance characteristics. In our experiments, an architecture now referred to as “A...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2020
ISSN: 1996-1944
DOI: 10.3390/ma13153374