Mechanical Tests and Microstructural Characterization of Hydrided Zr-1 wt% Nb
نویسندگان
چکیده
منابع مشابه
Effect of Mechanical Alloying and Sintering on Phase Transformation, Microstructural Evolution, Mechanical Properties and Density of Zr-Cr Alloy
The purpose of present research was production ofZr-based alloy as the nuclear fuel cladding by mechanical alloying (MA) and sintering process. Firstly, Zr and Cr powders were mechanically alloyed to produce the refractory and hard Zr-10 wt% Cr alloy, and then, the powder mixtures were consolidated by press and following sintering at temperature of 800˚C min. The phase evolution, microstructura...
متن کاملNanocrystalline Al7075 + 1 wt % Zr Alloy Prepared Using Mechanical Milling and Spark Plasma Sintering
The microstructure, phase composition, and microhardness of both gas-atomized and mechanically milled powders of the Al7075 + 1 wt % Zr alloy were investigated. The gas-atomized powder exhibited a cellular microstructure (grain size of a few µm) with layers of intermetallic phases along the cell boundaries. Mechanical milling (400 revolutions per minute (RPM)/8 h) resulted in a grain size reduc...
متن کاملStructural and mechanical properties of γ-irradiated Zr/nb multilayer nanocomposites
Zr/Nb multilayers with periodicities of 10, 30 and 60 nm were prepared by magnetron sputtering and irradiated for prolonged time (1311 h) by γ-rays with energy of 1.25 MeV and a dose of 510 kGy. A qualitative comparison between XRD patterns acquired before and after irradiation revealed a progressive increase of compressive stress, especially in Nb layers, for smaller periodicities with a conse...
متن کاملEffect of layer thickness on the mechanical behavior of oxidation-strengthened Zr/Nb nanoscale multilayers
The effect of bilayer thickness (L) reduction on the oxidation-induced strengthening of Zr/Nb nanoscale metallic multilayers (NMM) is investigated. Zr/Nb NMMs with L = 10 and 75 nm were annealed at 350 oC for a time ranging between 2 and 336 h and the changes in structure and deformation behaviour were studied by nano-scale mechanical testing and analytical electron microscopy. Annealing led to...
متن کاملThe Microstructural Evolution and Mechanical Properties of Zr-Based Metallic Glass under Different Strain Rate Compressions
In this study, the high strain rate deformation behavior and the microstructure evolution of Zr-Cu-Al-Ni metallic glasses under various strain rates were investigated. The influence of strain and strain rate on the mechanical properties and fracture behavior, as well as microstructural properties was also investigated. Before mechanical testing, the structure and thermal stability of the Zr-Cu-...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Materials Science
سال: 2012
ISSN: 2211-8128
DOI: 10.1016/j.mspro.2012.06.070