Mechanical Vibration Mechanism Motion Simulation of Ultrasonic Composite Vibration Polishing Equipment
نویسندگان
چکیده
منابع مشابه
Generic Vibration Criteria for Vibration-Sensitive Equipment
The vibration criterion (VC) curves, commonly used in the design of facilities which house vibration-sensitive instruments and tools, were developed by the author and his colleagues, in the early 80’s, published by SPIE in 1991 and by IEST in 1993. Each of the criterion curves A through E is associated with a “line width” or “detail size” which was an attempt by the authors to describe the capa...
متن کاملPlacement Study of Composite Vibration Isolation System for Machinery Equipment
Article history: Received: 28.11.2014. Received in revised form: 19.3.2015. Accepted: 1.4.2015. In traditional vibration isolation and placement studies, vibration participation of foundation is often ignored, and optimizations are focused on the improvements of isolated object and isolation system. In this paper, clamped thin plate was considered as the foundation, and "machinery equipment vib...
متن کاملVibration budget for observatory equipment
Vibration from equipment mounted on the telescope and in summit support buildings has been a source of performance degradation at existing astronomical observatories, particularly for adaptive optics performance. Rather than relying only on best practices to minimize vibration, we present here a vibration budget that specifies allowable force levels from each source of vibration in the observat...
متن کاملDevelopment of Ultrasonic Vibration Assisted Polishing Machine for Micro Aspheric Die and Mold
Demands are increasing for micro axis-symmetric aspherical lenses to be installed in various optical devices. The micro glass lenses are generally molded by glass press process with micro aspheric ceramic molding dies or molds made of tungsten carbide or silicon carbide. These dies and molds are mostly ground with micro diamond wheels, but require additional finishing process as the size of the...
متن کاملInfluence of ultrasonic vibration on micro-extrusion.
Micro-forming is a miniaturization technology with great potential for high productivity. Some technical challenges, however, need to be addressed before micro-forming becomes a commercially viable manufacturing process. These challenges include severe tribological conditions, difficulty in achieving desired tolerances, and short tool-life due to inability of available die materials to withstan...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2018
ISSN: 2261-236X
DOI: 10.1051/matecconf/201823701014