Mechanisms and forming rules of large thin-walled aluminum alloy components in electromagnetic incremental forming
نویسندگان
چکیده
منابع مشابه
The Effects of Forming Parameters on the Single Point Incremental Forming of 1050 Aluminum Alloy Sheet
The single point incremental forming (SPIF) is one of the dieless forming processes which is widely used in the sheet metal forming. The correct selection of the SPIF parameters influences the formability and quality of the product. In the present study, the Gurson-Tvergaard Needleman (GTN) damage model was used for the fracture prediction in the numerical simulation of the SPIF process of alum...
متن کاملFlexible Forming of Thin Aluminum Alloy Sheets
Flexible forming is a sheet metal forming process with the application of soft material tooling. In this study, flexible (silicone rubber, SR, and styrene butadiene rubber, SBR) and semi-rigid (polyamide 66, PA) polymeric materials were adopted to make several upper dies which were used in combination with aluminium lower dies. Stamping operations were performed on a thin aluminium alloy sheet ...
متن کاملInvestigation of the Forming Force in Torsion Extrusion Process of Aluminum Alloy 1050
In this paper, torsion extrusion (TE) process on 1050 aluminum alloy was investigated by simulation as a severe plastic deformation (SPD) method and the effects of friction coefficient, angular velocity of the rotating die and punch speed on maximum punch force were studied. A finite element (FE) model was developed to simulate the TE process via DEFORM software. The FE results were validated co...
متن کاملInvestigation on Formability of Tailor-Welded Blanks in Incremental Forming
Steel laser tailor-welded blanks (TWBs) are produced by end-to-end joining of base sheets using different welding methods. In this article, the formability of laser TWBs of St12 and St14 with thicknesses of 1 mm and 1.5 in single point incremental forming process were experimentally and numerically investigated. First, the forming limit wall angle was experimentally determined for each of the b...
متن کاملExperimental Study on Warm Incremental Tube Forming of AA6063 Aluminum Tubes
Effect of temperature on formability of AA6063 aluminum tubes in incremental forming process was investigated. Experiments are performed on AA6063 aluminum tubes. A spirally moving tool incrementally expands the tube wall. The tube is clamped from both ends while the deformation zone is not in contact with the die. A circumferential heating system is used to heat the tube due to the low formabi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Manufacturing
سال: 2018
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2018.07.354