Mechanisms and mitigation of agglomeration during fluidized bed combustion of biomass: A review
نویسندگان
چکیده
منابع مشابه
GASIFICATION vs COMBUSTION OF WASTE/BIOMASS IN FLUIDIZED BED REACTORS
This paper presents a comparison of commercial fluidized bed gasifiers and combustors used to recover energy from municipal solid wastes and biomass. The work reported here is excerpted from four case studies prepared for the International Energy Agency’s Bioenergy Agreement, under Task 23 (Energy from Thermal Conversion of MSW and RDF, 1998-2000) and Task 36 (Energy from Integrated Solid Waste...
متن کاملAdvanced Process Control for Fluidized Bed Agglomeration
Fluidized bed agglomeration is an advanced technology to produce spherical coarse-grained material of uniform size ready for sale without any need for post-treatment. This study discusses the possibilities and appropriateness of an intelligent control method such as a fuzzy logic controller in simulating and controlling fluidized bed agglomeration performance. Modeling and simulation was perfor...
متن کاملCfd Analysis of Circulating Fluidized Bed Combustion
In this paper computational analysis of circulating fluidized bed combustion using the fluent software is analysed. This work is concerned about gas–solid two-phase mixtures flowing upwards through the fast beds. The procedures studied are applicable to all types of fluidized-bed boilers. The type of information resulting from various ways of analyzing the pressure and temperature in fluidized ...
متن کاملExperimental Study of Fluidized Bed Agglomeration of Acerola Powder
The aim of this work was to study the main effects of acerola powder on fluidized bed agglomeration. A 2 fractional factoring design was used to evaluate the main operating conditions (fluidizing air temperature, fluidizing air velocity, atomizing air flow and height of nozzle in the bed). The mechanical and physicochemical product changes were determined by analysis of particle diameter, moist...
متن کاملEarly Detection of Agglomeration in Fluidized Bed Polymerisation Reactors
Polyethylene (PE) and polypropylene (PP) make up for a large part of the total worldwide polymer production. Originally, both polymers were often produced in solution processes. However, fluidized bed reactors for polyethylene and polypropylene production gain increasing industrial interest because of the relatively low production costs, the ability to produce a wide range of polymer grades, an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fuel
سال: 2018
ISSN: 0016-2361
DOI: 10.1016/j.fuel.2018.04.098