Melt Flow Properties of Polypropylene
نویسندگان
چکیده
منابع مشابه
The Melt Shear Viscosity of Polypropylene/Glass Bead Composites at High Extrusion Flow Rates
The effects of filler content and its surface treatment with silane coupling agent on the melt shear viscosity of glass bead-filled polypropylene (PP) composites have been investigated using a capillary rheometer at a wide shear rate scope of 150 to 7200 s and temperature range of 160 to 200 C. The melt flow obeys power law, but the slopes of the flow curves have transitions at the shear rate o...
متن کاملsynthesis of high isotactic and high melt flow polypropylene in liquid propylene
this is a report on the study of high melt flow, highly isotactic polypropylene homopolymer synthesized in liquid monomer using a fifth generation ziegler-natta catalytic system. at highest catalyst productivity, the response of thecatalyst to hydrogen as chain transfer is studied. melt flow rate is controlled by hydrogen as chain transfer from 0.4 to 300 g/10min with changing the amount of hyd...
متن کاملFabrication of Melt Spun Polypropylene Nanofibers by Forcespinning
Melt spinning of polypropylene nonwoven nanofiber mats is demonstrated using Forcespinning The effects of rotational speed and melt flow rate of polymer on fiber diameter were studied. It was observed that melt flow rate of the polymer plays a major role in nanofiber formation and uniformity. Differential scanning calorimetry and X-Ray Diffraction analysis indicate that the crystallinity of nan...
متن کاملExtensional-flow-induced crystallization of isotactic polypropylene
A filament stretching extensional rheometer with a custom-built oven was used to investigate the effect of uniaxial flow on the crystallization of polypropylene. Prior to stretching, samples were heated to a temperature well above the melt temperature to erase their thermal and mechanical histories and the Janeschitz-Kriegl protocol was applied. The samples were stretched at extension rates in ...
متن کاملMelt volume flow rate and melt flow rate of kenaf fibre reinforced Floreon/magnesium hydroxide biocomposites
A study of the melt volume flow rate (MVR) and the melt flow rate (MFR) of kenaf fibre (KF) reinforced Floreon (FLO) and magnesium hydroxide (MH) biocomposites under different temperatures (160-180 °C) and weight loadings (2.16, 5, 10 kg) is presented in this paper. FLO has the lowest values of MFR and MVR. The increment of the melt flow properties (MVR and MFR) has been found for KF or MH inse...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of the Society of Chemical Industry, Japan
سال: 1963
ISSN: 0023-2734,2185-0860
DOI: 10.1246/nikkashi1898.66.10_1468