Melt-processed all-polymer distributed Bragg reflector laser
نویسندگان
چکیده
منابع مشابه
Melt-processed all-polymer distributed Bragg reflector laser.
We have assembled and studied melt-processed all-polymer lasers comprising distributed Bragg reflectors that were fabricated in large sheets using a co-extrusion process and define the cavities for dye-doped compression-molded polymer gain core sheets. Distributed Bragg reflector (DBR) resonators consisting of 128 alternating poly(styrene) (PS) and poly(methyl methacrylate) (PMMA) layers were p...
متن کاملUltra-short distributed Bragg reflector fiber laser for sensing applications.
We present an ultra-short distributed Bragg reflector fiber laser written in Er/Yb co-doped fiber. The entire laser is only 8.4 mm in length. The lasing threshold is less than 1 mW. The optical signal-to-noise ratio of the laser output is better than 70 dB. The laser emits two orthogonal polarization modes and generates a beat signal with signal-to-noise ratio of approximately 70 dB and 3-dB li...
متن کاملAll-fibre photonic crystal distributed Bragg reflector (PC-DBR) fibre laser.
We describe an Er3+-doped aluminosilicate core photonic crystal fibre laser incorporating distributed Bragg reflectors written by two-photon 193nm irradiation through an optical phase mask as the feedback elements. The laser is diode pumped at 980nm and evidence of dual linewidth laser operation close to threshold is observed. However, at higher pumping levels gain competition preferentially se...
متن کاملanalysis of three section distributed bragg reflector tunable laser diode based on the transfer matrix method
we present a detailed analysis of the static tuning characteristics of three section tunable distributed bragg reflector (dbr) laser. the analysis is based on the transfer matrix method (tmm), transmission line and scattering theory. the key feature of the analysis is the use of modified oscillation condition. with the exact oscillation condition, the static tuning characteristics such as thres...
متن کاملDistributed feedback-distributed Bragg reflector coupled cavity laser with a Ti:(Fe:)Er:LiNbO3 waveguide.
A thermally fixed photorefractive Bragg grating is written in a single-mode Ti:Fe:Er:LiNbO3 channel waveguide and used to develop a distributed feedback-distributed Bragg reflector coupled cavity laser with a second broadband dielectric cavity mirror. The optically pumped (lambda(p) = 1480 nm, P = 130 mW) laser emits in single-frequency operation as much as 8 mW at lambda = 1557.2 nm with a slo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2008
ISSN: 1094-4087
DOI: 10.1364/oe.16.010358