Melting Behavior of Alumina Particles in Plasma Spraying
نویسندگان
چکیده
منابع مشابه
Direct current plasma spraying of mechanofused alumina - steel particles
Stainless steel particles (60 μm in mean diameter) cladded with an alumina shell (2 μm thick and manufactured by mechanofusion) were sprayed with an Ar-H2 (53-7 slm) d.c. plasma jet (I = 500 A, P = 28 kW, th = 56 %). Two main types of particles were collected in flight, as close as 50 mm downstream of the nozzle exit: particles with a steel core with pieces of alumina unevenly distributed at t...
متن کاملComparison of Creep Behavior in Alumina Based Ceramics Densified by Spark Plasma Sintering and Hot Pressing
Spark plasma sintering (SPS) method, as plasma activated sintering, is a method applicable for rapid sintering of metals and ceramics. Owing to the advantage of rapid heating, the alumina ceramics obtained by SPS have a grain size and density comparable to those of hot pressed ones. The increase of densification rate may be related to some difference in ion transport characteristics. This study...
متن کاملFeasibility of Plasma Spraying in Developing MMC Coatings: Modeling the Heating of Coated Powder Particles
Coated powder particles composed of a ceramic core and a metallic coating are being considered for plasma spray applications. The goal of using these powders is to produce particulate-reinforced metal-matrix composite coatings. In this work, the feasibility of plasma spray processing in producing these composite coatings is evaluated. A numerical model is presented to analyze the in-flight ther...
متن کاملPlasma spraying and characterization of chromium carbide – nickel chromium coatings
Chromium carbide – nickel chromium powder Cr3C2-25wt.NiCr was plasma sprayed by a water-stabilized system WSP®. A series of experiments with variable feeding distance was carried out. Basic characterization of coatings was done by XRD, SEM and light microscopy plus image analysis. Microhardness was measured on polished cross sections. The main focus of investigation was on resistances against w...
متن کاملcomparison of creep behavior in alumina based ceramics densified by spark plasma sintering and hot pressing
spark plasma sintering (sps) method, as plasma activated sintering, is a method applicable for rapid sintering of metals and ceramics. owing to the advantage of rapid heating, the alumina ceramics obtained by sps have a grain size and density comparable to those of hot pressed ones. the increase of densification rate may be related to some difference in ion transport characteristics. this study...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1999
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.63.1_90