Member stability of stainless steel welded I-section beam-columns
نویسندگان
چکیده
منابع مشابه
Three-dimensional chemical analysis of laser-welded NiTi–stainless steel wires using a dual-beam FIB
The biomedical industry has an increasing demand for processes to join dissimilar metals, such as laser welding of NiTi and stainless steel wires. A region of the weld close to the NiTi interface, which previously was shown to be prone to cracking, was further analyzed by energy dispersive spectrometry (EDS) extended in the third dimension using a focused ion beam. As the spatial resolution of ...
متن کاملExplicit Stiffness of Tapered and Monosymmetric i Beam-Columns
A formulation for finite element analysis of tapered and monosymmetric I shaped beam-columns is presented. This is a general way to analyze these types of complex elements. Based upon the formulation, member stiffness matrix is obtained explicitly. The element considered has seven nodal degrees of freedom. In addition, the related stability matrix is found. Numerical studies of the aforementio...
متن کاملImpact of cross-section stability on cold-formed steel member stiffness and ductility
The objective of this paper is to provide work towards design methods to predict both the loss of stiffness and the available ductility for cold-formed steel members subject to cross-section deformations resulting from local and distortional buckling. Existing design specifications provide some guidance on how to predict the stiffness of cold-formed steel members, but no guidance on their avail...
متن کاملSeismic Behavior of Steel Reinforced Concrete Beam-Columns and Frames
The ability to perform accurate nonlinear simulations is a key component in the assessment of the behavior of seismic force resisting systems. A three-dimensional distributed plasticity formulation for composite beam-columns suitable for nonlinear static and dynamic analyses of composite seismic force resisting systems has been developed. New uniaxial constitutive relations are developed for th...
متن کاملCreep Deformation Measurement of 316H Stainless Steel Multi-pass Welded Joints using Digital Image Correlation
A high temperature measurement system for creep deformation based on the digital image correlation (DIC) technique is described. The new system is applied to study the behaviour of a multi-pass welded joint in a high temperature tensile test and a load controlled creep test at 545°C. Spatially resolved tensile properties and time dependent creep deformation properties across a thick section typ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Constructional Steel Research
سال: 2019
ISSN: 0143-974X
DOI: 10.1016/j.jcsr.2018.12.022