Meqalac RF Accelerating Structure
نویسندگان
چکیده
منابع مشابه
RF Measurements of a Traveling-Wave Muffin-Tin Accelerating Structure at 90 GHz
A measuring system at the table-top scale was developed for RF measurements of a muffin-tin accelerating structure operating at 32 times the SLAC frequency (2.856 GHz). Both perturbation and non-perturbation methods are employed to characterize the RF properties of a muffin-tin structure. Conventional bead pull measurements are extended to millimeter wavelengths. Design of the measuring system ...
متن کاملDesign, Fabrication and Rf Measurement of a W–band Accelerating Structure
The paper presents a design of a W-band planar accelerating structure (muffin tin) [1]. The structure is a 2 /3-mode traveling wave, constant impedance structure with an operating frequency of 91.392 GHz. The design includes a new power coupler and a cavity geometry optimized for high shunt impedance. A 7–cell cold test prototype has been fabricated by wire electro discharge machining. Measurem...
متن کاملTwisted Waveguide Accelerating Structure
A hollow waveguide with a uniform cross section may be used for accelerating charged particles if the phase velocity of an accelerating mode is equal to or less than the fiee space speed of light. Regular straight hollow waveguides have phase velocities of propagating electromagnetic waves greater than the free-space speed of light. if the waveguide is twisted, the phase velocities of the waveg...
متن کاملRf Accelerating System for a Compact Ion Synchrotron
We have developed an RF accelerating system for a compact ion synchrotron. The RF cavity is an untuned type loaded with FINEMET cores, which have high complex permeability, high saturation flux density, and high Curie temperature properties. A new power feeding method, “multi-feed coupling,” was developed to match the cavity impedance with output impedance of a solidstate RF amplifier. We have ...
متن کاملSuperconducting Coatings for Accelerating Rf Cavities: Past, Present, Future
About 200 superconducting RF accelerating cavities of 352 MHz frequency, each consisting of four cells, are required to upgrade the LEP energy from an initial value of 55 GeV to about 90 GeV. About 170 of these cavities, which have already been ordered from European industry, will be made of copper and coated internally with a thin layer of niobium. The coating will be carried out by sputtering...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Nuclear Science
سال: 1981
ISSN: 0018-9499
DOI: 10.1109/tns.1981.4332144