Metal-ceramic joining by laser

Metal-ceramic joining by laser

Within the scope of increase in cutting tools efficiency, a CW CO;! laser beam has been used for butt welding sintered tips containing cobalt and tungsten carbide to a medium carbon steel core. After optimization of the laser processing conditions, full penetrating, sound and homogeneous welds are observed. Hardness is found to be nearly constant across the entire weld bead cross-section. Micro...

Ceramic/metal joining for structures and materials

The paper presents a discussion of the various types of ceramic joining within a conceptual framework based on the fundamentals of wetting, adhesion, and the thermodynamics of interfacial reactions. Examples are given of solid state diffusion bonding of Pt to alumina and brazing of AlN. Most ceramic-metal bonding is conducted at high temperatures, where chemical reaction is to be expected. The ...

Ceramic-Metal Joining Using Active Filler Alloy-An In-Depth Electron Microscopic Study

Debonding of ceramic brackets by Er:YAG laser

PURPOSE The objective of the present study is to evaluate the effects of Er:YAG laser debonding of ceramic brackets on the bond strength and the amount of adhesive resin remnant. MATERIALS AND METHODS Twenty human mandibular incisors were randomly divided into two groups of 10 and polycrystalline ceramic brackets (Transcend series 6000, 3M Unitek, Monrovia, CA, USA) were bonded on enamel surf...

Bond and fracture strength of metal-ceramic restorations formed by selective laser sintering

PURPOSE The purpose of this study was to compare the fracture strength of the metal and the bond strength in metal-ceramic restorations produced by selective laser sintering (SLS) and by conventional casting (CAST). MATERIALS AND METHODS Non-precious alloy (StarLoy C, DeguDent, Hanau, Germany) was used in CAST group and metal powder (SP2, EOS GmbH, Munich, Germany) in SLS group. Metal specime...