Metallic Color Filter Fabrication using Photo-Curable Polymer Stacking
نویسندگان
چکیده
منابع مشابه
Fabrication of Metallic Heat Exchangers Using Sacrificial Polymer Mandrils
This paper demonstrates the use of poly(dimethylsiloxane) (PDMS), polyurethane (PU), epoxy, and poly(methyl methacrylate) (PMMA) as mandrils to fabricate metallic heat exchangers having 300–700 m internal channels. The mandrils were prepared using two soft lithographic techniques-replica molding, and microembossing. To fabricate the heat exchangers, the polymeric mandrils were coated with a thi...
متن کاملA Novel Fabrication Technique for Liquid-Tight Microchannels by Combination of a Paraffin Polymer and a Photo-Curable Silicone Elastomer
The development and growth of microfluidics has been mainly based on various novel fabrication techniques for downsizing and integration of the micro/nano components. Especially, an effective fabrication technique of three-dimensional structures still continues to be strongly required in order to improve device performance, functionality, and device packing density because the conventional lami...
متن کاملFabrication of polymer microlens arrays using capillary forming with a soft mold of micro-holes array and UV-curable polymer.
This paper reports a simple and effective method to fabricate microlens arrays with the ultraviolet-curable resins, and a soft mold of micro-holes array. During capillary forming operation, the surface of the soft mold of micro-holes array is being pressed against the ultraviolet-curable resin layer coated on the plastic substrate. An array of convex lense can be formed in the circular holes of...
متن کاملSubwavelength Metallic Gratings as an Integrated Device: Polarized Color Filter
Subwavelength metallic gratings were proposed as integrated polarized-RGB (red, green, and blue) color filters here and their performance was further numerically optimized with the rigorous coupled-wave analysis (RCWA) method and the genetic algorithm (GA). Grating types include the single-layer type and the double-layer one while parameters to be optimized are the period, filling factor, and t...
متن کاملFabrication of high-aspect-ratio metallic nanostructures using nanoskiving.
This communication describes the fabrication of gold structures (for example, rings) with wall thickness of 40 nm, and with high aspect ratios up to 25. This technique combines thin-film deposition of metal on a topographically patterned epoxy substrate, with nanometer-scale sectioning using a microtome in a plane parallel to the patterned substrate. The dimensions of the metal structures are d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Photopolymer Science and Technology
سال: 2016
ISSN: 0914-9244,1349-6336
DOI: 10.2494/photopolymer.29.221