Metallic materials in solid oxide fuel cells

Materials for Solid Oxide Fuel Cells

Solid oxide fuel cells (SOFCs) have the promise to improve energy efficiency and to provide society with a clean energy producing technology. The high temperature of operation (500-1000 C) enables the solid oxide fuel cell to operate with existing fossil fuels and to be efficiently coupled with turbines to give very high efficiency conversion of fuels to electricity. Solid oxide fuel cells are ...

Electrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects

In the present study, Mn - Cr spinel powder was synthesized through a solid state reaction. In the next step, the electrophoretic deposition (EPD) method was used to apply the MnCr2O4 spinel, as an oxidation-resistant layer, on SUS 430 stainless steel in a potential of 300 V/cm. The coated and uncoated samples were then pre-sintered in air at 900 °C for 3 h followed by cyclic oxidation at 800 °...

Modeling of Solid Oxide Fuel Cells

A comprehensive membrane-electrode assembly (MEA) model of Solid Oxide Fuel Cell (SOFC)s is developed to investigate the effect of various design and operating conditions on the cell performance and to examine the underlying mechanisms that govern their performance. We review and compare the current modeling methodologies, and develop an one-dimensional MEA model based on a comprehensive approa...

Modeling of Solid-Oxide Fuel Cells

This article presents a brief review on modeling philosophies of solid-oxide fuel cells (SOFCs) including an introduction to SOFC components and their functions. While a plethora of numerical models is available for SOFC modeling and simulation, this paper focuses on a general overview on mathematical model equations that represent the physico-chemical processes occurring in SOFCs and their bou...

Direct hydrocarbon solid oxide fuel cells.